How to Replace and Center a Steering Angle Sensor on 2000 GMC C2500?

In order to substitute the steering angle sensor or lower bearing, switch off the SIR system and take out the steering column. Uncouple the required parts of the steering shaft. To install, reconnect the parts sequentially, activate the SIR system, and reconnect the steering column. Make sure the sensor is well aligned in the process of installation.

OEM 2000 GMC C2500 Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Angle Sensor found

View related parts
2000 GMC C2500 Speed Sensor Part Number: 26064468
$72.07 MSRP: $128.70
You Save: $56.63 (44%)
Product Specifications
- Other Name: Sensor, Steering Column; Steering Wheel Speed Sensor; Steering Angle Sensor; Position Sensor; Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 5.1 x 4.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26064468
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 GMC C2500 Submodels:
- Sierra SL, Sierra SLE, Sierra SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS

2000 GMC C2500 Steering Angle Sensor

With a comprehensive array of OEM 2000 GMC C2500 Steering Angle Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 GMC C2500 Steering Angle Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 GMC C2500 Steering Angle Sensor Parts and Q&A

Q: How to Replace and Center a Steering Angle Sensor on 2000 GMC C2500?
A: In order to substitute the steering angle sensor or lower bearing, switch off the SIR system and take out the steering column. Uncouple the required parts of the steering shaft. To install, reconnect the parts sequentially, activate the SIR system, and reconnect the steering column. Make sure the sensor is well aligned in the process of installation.