How to replace the intermediate steering column seal on 2010 Cadillac STS?

To change the intermediate steering shaft seal, remove the Steering Column with the upper intermediate shaft attached to it, taking care to follow the procedure for either the jl7 or non-jl7 configurations. Then remove the intermediate shaft seal from the mod plate. For installation, attach the new intermediate shaft seal onto the mod plate with the proper seal between the intermediate shaft seal and the mod plate. Then, re-install Steering Column following procedures for either the jl7 or non-jl7 configurations. Finally, allow the sir system to conclude the process.

OEM 2010 Cadillac STS Steering Column Seal

Steering Column to Firewall Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Column Seal found

View related parts
2010 Cadillac STS Lower Cover
Part Number: 26064593
Product Specifications
- Other Name: Seal, Steering Column; Coupling Shield; Seal; Boot
- Item Weight: 1.00 Pounds
- Item Dimensions: 10.1 x 4.2 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 26064593
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Cadillac STS Submodels:
- Base, Platinum, V | 6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS

2010 Cadillac STS Steering Column Seal

With a comprehensive array of OEM 2010 Cadillac STS Steering Column Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Cadillac STS Steering Column Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Cadillac STS Parts Questions & Experts Answers

Q: How to replace the intermediate steering column seal on 2010 Cadillac STS?
A: To change the intermediate steering shaft seal, remove the Steering Column with the upper intermediate shaft attached to it, taking care to follow the procedure for either the jl7 or non-jl7 configurations. Then remove the intermediate shaft seal from the mod plate. For installation, attach the new intermediate shaft seal onto the mod plate with the proper seal between the intermediate shaft seal and the mod plate. Then, re-install Steering Column following procedures for either the jl7 or non-jl7 configurations. Finally, allow the sir system to conclude the process.