Make sure this part fits

GM 15241415
Rear Cable

2004-2009 GM

Customer Questions & Expert Answers (7)
GM 15241415 Rear Cable
GM 15241415 Rear Cable
  • Part Description
    Cable, Parking Brake; Brake Cable
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number15241415
    Part DescriptionCable, Parking Brake; Brake Cable
    Item Dimensions4.1 x 11.4 x 11.4 inches
    Item Weight1.30 Pounds
    PositionRear
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU15241415
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    2004-2008 Pontiac Grand PrixBase, GT, GT1, GT2, GTP, GXP6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
  • Customer Questions & Expert Answers

    Q:
    Is this 15241415 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15241415 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the right rear parking brake cable on Buick LaCrosse? Posted by Customer
    A:
    Tire removal together with the rear assembly will start the procedure to replace the right rear Parking Brake Cable. Separate the cable from the equalizer component at the rear suspension support assembly. With the help of the Parking Brake Cable release tool (J 37043) you should press the retaining tabs that control the Parking Brake Cable closest to the equalizer. To perform the next step remove the caliper guide bolts from the rear brake bracket before sliding both caliper and the Parking Brake Cable end through the wheel opening. The caliper needs to be rotated with the convex side facing downward before aligning the lower guide pin hole and installing the guide pin bolt which will support the caliper assembly through the upper guide pin hole in the caliper bracket. You must rotate the Parking Brake Cable end within the caliper lever to see one of its three retaining tabs. Use a screwdriver to push through this tab while you guide the cable elbow toward the vehicle front for removing the cable end through the caliper lever opening. Take out the Parking Brake Cable that is installed on the vehicle. To install the new Parking Brake Cable users should position it into the vehicle and should fit the cable end fitting into the caliper lever which requires appropriate seating of locking tabs. Push the opposite end of the cable to enter the wheel opening until it reaches the rear support assembly. Put the caliper guide bolt aside initially before installing the brake caliper into position correctly while tightening the guide bolts to 34 n.m (25 lb ft). Fasten the equalizer stud to the equalizer nut from the equalizer assembly and use it to reduce cable length at the equalizer. Proceed by installing the tires and wheels on the rear before lowering the car for parking brake adjustment.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the left rear parking brake cable for the 2005 Buick LaCrosse? Posted by Customer
    A:
    Raise and support the vehicle and remove the rear tire and assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the final step in the installation process for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Install the equalizer stud to the equalizer nut, take up the cable slack at the equalizer, install the rear tire and wheel assembly, lower the vehicle, and adjust the parking brake system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    What is the first step to replace the parking brake rear cable on the right side (J65) for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How should the brake caliper be reinstalled for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Remove the caliper guide bolt and reinstall the brake caliper in the correct position, tightening the guide bolts to 34 Nm (25 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    Q:
    How do you disconnect the parking brake cable for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Disconnect the cable from the equalizer at the rear suspension support assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Parking Brake Cable
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 15241415, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 15241415 Rear Cable. It is sometimes referred to as GM Parking Brake Cable. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 15241415 Rear Cable. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Buick parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery