GM 25879877
Reservoir Nut

The first step to replace remote Power Steering Reservoir requires removal of the fuel injector sight shield. The remote Power Steering Reservoir requires maximum drainage before you place collecting pans beneath the vehicle. To start the upgrade, compress the Power Steering Reservoir inlet hose clamp until you disconnect the hose from the remote Power Steering Reservoir. Then do the same to the Power Steering Reservoir outlet hose by compressing its clamp next to disconnecting the hose. Take out the remote Power Steering Reservoir by removing its bolts. Begin by mounting the remote Power Steering Reservoir and fasten it in place with the remote Power Steering Reservoir bolts while torquing them to 9 n.m (80 lb in). Around the reservoir attach the outlet Power Steering Hose and clamp and then add the inlet Power Steering Hose with its clamp. Wipe off all surplus fluid from the vehicle before taking away drain pans. Power steering system filling must be followed by bleeding then reinstallation of the fuel injector sight shield.

The first step to replace the remote power steering reservoir demands removing the fuel injector sight shield followed by draining power steering fluid from the reservoir until it empties. The power steering system requires the inlet hose and the outlet hose to be unplugged before removing the reservoir by its bolts. Start installation by placing the new reservoir in position then fasten it using bolts before tightening them to 9 N.m (80 lb in). The first step involves connecting the outlet hose and the inlet hose, following which the vehicle needs cleaning of any remaining fluid before removing the drain pans. Complete the power steering system filling process and eliminate air from the system before you replace the fuel injector sight shield.