How to replace the front door power door lock switch on 2001 Buick Park Avenue?

A flat-bladed tool should be inserted under the front edge of the switch plate to softly pry it upwards from the door trim panel for power door lock switch replacement. Frontward motion of the switch will release the rear retainer tabs while also allowing you to remove the electrical connectors. A small flat-bladed tool should be used to release the retainer tabs which allow the removal of the switch pack from the switch plate. To install the switch pack users need to fit it back into the switch plate then connect the electrical connectors and place tabs behind the switch plate under the door trim panel. After placing the front of the switch plate under pressure the retainer clip becomes activated.

OEM 2001 Buick Park Avenue Door Lock Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Lock Switches found

View related parts
2001 Buick Park Avenue Lock Switch Part Number: 25650589
Product Specifications
- Other Name: Switch, Door Electric And Vacuum Locks; Door Lock Switch
- Item Weight: 0.30 Pounds
- Item Dimensions: 2.0 x 2.0 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25650589
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2001 Buick Park Avenue Release Switch, Rear Part Number: 16632244
Product Specifications
- Other Name: Switch, Rear Compartment Lid Release Or Ajar
- Position: Rear
- Item Weight: 0.40 Pounds
- Item Dimensions: 5.7 x 3.6 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16632244
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2001 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2001 Buick Park Avenue Door Lock Switch

With a comprehensive array of OEM 2001 Buick Park Avenue Door Lock Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Park Avenue Door Lock Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick Park Avenue Door Lock Switch Parts and Q&A

Q: How to replace the front door power door lock switch on 2001 Buick Park Avenue?
A: A flat-bladed tool should be inserted under the front edge of the switch plate to softly pry it upwards from the door trim panel for power door lock switch replacement. Frontward motion of the switch will release the rear retainer tabs while also allowing you to remove the electrical connectors. A small flat-bladed tool should be used to release the retainer tabs which allow the removal of the switch pack from the switch plate. To install the switch pack users need to fit it back into the switch plate then connect the electrical connectors and place tabs behind the switch plate under the door trim panel. After placing the front of the switch plate under pressure the retainer clip becomes activated.