Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2001 Buick Park Avenue Knock Sensor

Engine Knock Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

  • 2001 Buick Park Avenue Knock Sensor - 12591625
    2001 Buick Park Avenue Knock Sensor Diagram - 12591625
    View related parts

    2001 Buick Park Avenue Knock Sensor

    Part Number: 12591625
    $66.57 MSRP: $135.22
    You Save: $68.65 (51%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Sensor, Distributor (Also Knock Sensor)
    • Replaces: 10456215
    • Item Weight: 0.50 Pounds
    • Item Dimensions: 3.1 x 2.1 x 2.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 12591625
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2001 Buick Park Avenue Submodels:
    • Base, Ultra | 6 Cyl 3.8 L GAS

2001 Buick Park Avenue Knock Sensor

With a comprehensive array of OEM 2001 Buick Park Avenue Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2001 Buick Park Avenue Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2001 Buick Park Avenue Parts Questions & Experts Answers

  • Q: How to replace the Knock Sensor (KS) 1 on 2001 Buick Park Avenue?
    A: Begin the Knock Sensor (KS) 1 replacement process by turning OFF the ignition while draining the cooling system. Detach the vehicle from the ground then disconnect the knock sensor wiring harness connector that is connected to the knock sensor. Disconnect the knock sensor wiring harness connector from the engine block and then remove the knock sensor itself. During knock sensor installation you should avoid using thread sealant on the sensor threads due to its factory coating since extra sealant may affect sensor detonation detection. Screw the knock sensor into the engine block and tighten it to 19 N.m (14 lb ft). Lower the vehicle while connecting the knock sensor electrical connector to the knock sensor . Then fill the cooling system. Check the coolant level after starting the engine.

Related 2001 Buick Park Avenue Parts

Alternate Year Models

+
2000 Buick Park Avenue Knock Sensor 2002 Buick Park Avenue Knock Sensor