How to replace the front brake calipers on 2003 GMC Safari?

Before starting the brake caliper replacement inspect the brake master cylinder reservoir fluid level; if it sits at the middle area add no fluids but drain some fluid if the level goes beyond it. Lift up the vehicle and take off the tire and wheel assembly. Use a C-clamp to push the brake caliper pistons toward the caliper while pressing the clamp over the housing against this side of the outboard pad until all pistons are fully retracted. After preparing the brake hose tip install a rubber cap to cover and shield the brake pipe opening from fluid loss or external contamination. Disconnect the brake hose to caliper bolt and discard the 2 copper gaskets since they may be attached to the caliper housing or brake hose end. Pull the brake hose off the caliper. When removing the brake caliper and mounting bolts do not push the brake pedal to prevent component harm. Take out the brake caliper from its mounting bracket location. Fit the brake caliper to its mounting bracket before securing it using 2 bolts and torquing them to 108 Nm (80 ft. lbs.). Insert brake hose into caliper and apply 2 copper gaskets while fitting new rubber caps onto the brake port. Then attach the bolt connecting the brake hose to both components. Fasten the brake hose to the brake caliper by tightening it to 40 Nm (30 ft. lbs.). Let hydraulic brake fluid flow out then place tire wheels back into position and let the vehicle sink while filling the master cylinder reservoir to its required brake fluid level.

OEM 2003 GMC Safari Brake Calipers

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Calipers found

View related parts
2003 GMC Safari Caliper
Part Number: 19331021
$184.12 MSRP: $328.77
You Save: $144.65 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Rear
- Replaces: 18040101, 25848000
- Item Weight: 11.90 Pounds
- Item Dimensions: 7.2 x 4.1 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19331021
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Safari Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS
View related parts
2003 GMC Safari Caliper, Driver Side
Part Number: 18040100
$185.91 MSRP: $331.97
You Save: $146.06 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Driver Side
- Replaced by: 19331022
- Item Weight: 11.80 Pounds
- Item Dimensions: 12.8 x 7.2 x 4.0 inches
- Condition: New
- SKU: 18040100
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Safari Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS
View related parts
2003 GMC Safari Caliper
Part Number: 19331022
Product Specifications
- Other Name: Caliper, Wheel Brake Cylinder/Caliper; Brake Caliper
- Position: Rear
- Replaces: 25848001, 18040100
- Item Weight: 11.80 Pounds
- Item Dimensions: 13.0 x 7.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19331022
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Safari Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS
View related parts
2003 GMC Safari Overhaul Kit, Rear
Part Number: 18040086
Product Specifications
- Other Name: Caliper Kit, Rear Brake; Brake Caliper Repair Kit; Disc Brake Hardware Kit; Caliper Overhaul Kit; Caliper Kit, Wheel Brake Cylinder/Caliper Piston; Caliper Kit, Wheel Cylinder Piston
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 13.0 x 7.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 18040086
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Safari Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS
View related parts
2003 GMC Safari Caliper, Passenger Side
Part Number: 18040088
Product Specifications
- Other Name: Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Passenger Side
- Item Weight: 4.10 Pounds
- Item Dimensions: 9.5 x 8.2 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18040088
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Safari Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS
View related parts
2003 GMC Safari Caliper, Driver Side
Part Number: 18040087
Product Specifications
- Other Name: Brake Caliper; Caliper, Wheel Brake Cylinder/Caliper
- Position: Driver Side
- Item Weight: 4.40 Pounds
- Item Dimensions: 9.3 x 8.5 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18040087
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 GMC Safari Submodels:
- Base, SLE, SLT | 6 Cyl 4.3 L GAS

2003 GMC Safari Brake Calipers

With a comprehensive array of OEM 2003 GMC Safari Brake Calipers, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 GMC Safari Brake Calipers are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 GMC Safari Brake Calipers Parts Questions & Experts Answers

Q: How to replace the front brake calipers on 2003 GMC Safari?
A: Before starting the brake caliper replacement inspect the brake master cylinder reservoir fluid level; if it sits at the middle area add no fluids but drain some fluid if the level goes beyond it. Lift up the vehicle and take off the tire and wheel assembly. Use a C-clamp to push the brake caliper pistons toward the caliper while pressing the clamp over the housing against this side of the outboard pad until all pistons are fully retracted. After preparing the brake hose tip install a rubber cap to cover and shield the brake pipe opening from fluid loss or external contamination. Disconnect the brake hose to caliper bolt and discard the 2 copper gaskets since they may be attached to the caliper housing or brake hose end. Pull the brake hose off the caliper. When removing the brake caliper and mounting bolts do not push the brake pedal to prevent component harm. Take out the brake caliper from its mounting bracket location. Fit the brake caliper to its mounting bracket before securing it using 2 bolts and torquing them to 108 Nm (80 ft. lbs.). Insert brake hose into caliper and apply 2 copper gaskets while fitting new rubber caps onto the brake port. Then attach the bolt connecting the brake hose to both components. Fasten the brake hose to the brake caliper by tightening it to 40 Nm (30 ft. lbs.). Let hydraulic brake fluid flow out then place tire wheels back into position and let the vehicle sink while filling the master cylinder reservoir to its required brake fluid level.