OEM 2004 Cadillac SRX Automatic Transmission Filter

2004 Cadillac SRX Parts Questions & Experts Answers

• Q: How to Service and Repair the Automatic Transmission Filter and Fluid for the 5L50-E on 2004 Cadillac SRX?

  A: The process of servicing and repairing the automatic transmission fluid and filter for the 5l50-e starts by securely lifting the vehicle before putting a drainage pan beneath the transmission fluid Drain Plug. Between checks for fluid discoloration and signs of contamination you need to remove and discard the transmission Drain Plug to let fluid flow out. The replacement transmission fluid Drain Plug needs tightening to 20 nm (15 ft. Lbs. Before full installation. To release the fluid pan you should first remove its bolts. Then gently strike the pan with a rubber mallet for additional loosening. Start by taking out both the fluid pan along with its gasket before cleaning and examining the magnet and pan and bolts and gasket for signs of deterioration or wear. The J 23129 Universal Seal Remover and J 6125-1B Slide Hammer Adapter must be used to remove the 2 fluid filter seals and the fluid filter with a long screwdriver. The transmission fluid filter neck requires 2 new seals which must be treated with a tiny amount of J 36850 Transjel Lubricant or petroleum jelly. The transmission fluid filter installation requires placement into the case while carrying out fluid pan and gasket installation together followed by tightening fluid pan bolts to 11 Nm (97 inch lbs.). The last task involves filling the transmission to its required fluid limit while lowering the vehicle so you can check for Oil Pan Gasket leakage.