How to replace the Camshaft Position Sensor for Bank 2 (Left Side) Exhaust on 2009 GMC Acadia?

You must remove the engine mount strut bracket before starting the Camshaft Position Sensor for Bank 2 (Left Side) Exhaust replacement process. Disconnect the bank 2 exhaust CMP sensor from its wiring harness electrical connector before removing its bolt along with the sensor itself. The installation of CMP sensor and bolt requires torque tightening the bolt up to 10 Nm (89 lb in). After completing the above steps the engine wiring harness electrical connector must be attached to the bank 2 exhaust CMP sensor and reinstallation of the engine mount strut bracket will finish the process.

OEM 2009 GMC Acadia Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2009 GMC Acadia Camshaft Position Sensor
Part Number: 12608424
$40.35 MSRP: $75.78
You Save: $35.43 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.3 x 2.6 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12608424
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Acadia Submodels:
- SLE, SLT | 6 Cyl 3.6 L GAS

2009 GMC Acadia Camshaft Position Sensor

With a comprehensive array of OEM 2009 GMC Acadia Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Acadia Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 GMC Acadia Parts Questions & Experts Answers

Q: How to replace the Camshaft Position Sensor for Bank 2 (Left Side) Exhaust on 2009 GMC Acadia?
A: You must remove the engine mount strut bracket before starting the Camshaft Position Sensor for Bank 2 (Left Side) Exhaust replacement process. Disconnect the bank 2 exhaust CMP sensor from its wiring harness electrical connector before removing its bolt along with the sensor itself. The installation of CMP sensor and bolt requires torque tightening the bolt up to 10 Nm (89 lb in). After completing the above steps the engine wiring harness electrical connector must be attached to the bank 2 exhaust CMP sensor and reinstallation of the engine mount strut bracket will finish the process.

Related 2009 GMC Acadia Parts

Alternate Year Models

2008 GMC Acadia Camshaft Position Sensor 2010 GMC Acadia Camshaft Position Sensor