How to replace the engine oil pressure switch on 2010 Buick Enclave?

To change the engine oil pressure sensor, then switch off the ignition of the engine, unattach the electrical connector. To remove the sensor, the suitable socket should be used and then the new sensor and tightening should be done. Lastly, reconnect the electrical connector making sure that all the connections are made.

OEM 2010 Buick Enclave Oil Pressure Switch

Oil Pressure Sender Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pressure Switch found

View related parts
2010 Buick Enclave Pressure Switch Part Number: 12635957
$48.31 MSRP: $82.24
You Save: $33.93 (42%)
ADD TO CART
Product Specifications
- Other Name: Switch, Engine Oil Pressure/Temperature; Oil Pressure Gauge Switch; Sensor; Switch; Pressure Sensor; Oil Pressure Sending Unit; Switch
- Replaced by: 19436253
- Replaces: 12611588, 12570964, 12590793, 12579946
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.1 x 2.2 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12635957
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Buick Enclave Submodels:
- Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS

2010 Buick Enclave Oil Pressure Switch

With a comprehensive array of OEM 2010 Buick Enclave Oil Pressure Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Buick Enclave Oil Pressure Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Buick Enclave Oil Pressure Switch Parts and Q&A

Q: How to replace the engine oil pressure switch on 2010 Buick Enclave?
A: To change the engine oil pressure sensor, then switch off the ignition of the engine, unattach the electrical connector. To remove the sensor, the suitable socket should be used and then the new sensor and tightening should be done. Lastly, reconnect the electrical connector making sure that all the connections are made.