How to replace the lower control arm ball joint on Buick Enclave?

Begin the lower Control Arm replacement process by taking out the assembly first. Place the lower Control Arm in the vise for safely holding it during installation. Begin drilling with the help of a center punch when working with a drill on rivets before removing the rivet head by drilling or grinding. Strike the lower Control Arm rivets with a punch and hammer until they let go from their position. Take out the Ball Joint from the lower Control Arm after this step. Install the Ball Joint onto the lower Control Arm while keeping the bolt in place and apply the appropriate torque during nut tightening. Secure the Ball Joint mounting parts after inserting bolts then tighten the nuts to 68 nm (50 lb ft). Sleep the Control Arm unit out of the vise and put it back into position. End your process by examining how straight the vehicle's front section is positioned.

OEM Buick Enclave Ball Joint

Control Arm Joint

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ball Joints found

View related parts
Buick Enclave Ball Joint, Front Lower Part Number: 19207521
$125.14 MSRP: $206.14
You Save: $81.00 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit, Front Lower Control Arm Ball; Suspension Ball Joint; Lower Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot; Stud Kit, Front Wheel Lower Control Arm
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Ball Joint, Front Lower Part Number: 15863690
$70.41 MSRP: $115.99
You Save: $45.58 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Stud Kit-Front Lower Control Arm Ball; Suspension Ball Joint; Lower Ball Joint; Stud Kit, Steering Knuckle Lower Control Arm Pivot; Stud Kit, Front Wheel Lower Control Arm
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS

Buick Enclave Ball Joint

Want to cut long-term maintenance and repair costs? Choose OEM Ball Joint. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Enclave parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Enclave Ball Joint includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Ball Joint of Buick Enclave vehicles is engaged in the suspension and steering mechanisms to couple control arm to steering knuckle. These ball joints help permit or allow 2-axes rotation while at the same time not allowing for any translation which is so useful in vehicle handling, stability andComfort. A ball joint, usually coming out of steel, includes the bearing stud and socket, and are often protected by a rubber-like cover to keep out dirt while allowing lubricants to circulate. Current automobiles mainly employ ball joints in the front suspensions; some high performance cars also apply this on rear suspensions. The use of ball joints has replaced a somewhat older kingpin design and has provided the ease of adjusting the caster and camber angles without incorporating any of the compliances that previously reduced tire life by limiting the tire's ability to maintain contact with the road.

Buick Enclave Ball Joint Parts Questions & Experts Answers

Ball Joint, Front Lower
19207521
Q: How to replace the lower control arm ball joint on Buick Enclave?
A:
Begin the lower Control Arm replacement process by taking out the assembly first. Place the lower Control Arm in the vise for safely holding it during installation. Begin drilling with the help of a center punch when working with a drill on rivets before removing the rivet head by drilling or grinding. Strike the lower Control Arm rivets with a punch and hammer until they let go from their position. Take out the Ball Joint from the lower Control Arm after this step. Install the Ball Joint onto the lower Control Arm while keeping the bolt in place and apply the appropriate torque during nut tightening. Secure the Ball Joint mounting parts after inserting bolts then tighten the nuts to 68 nm (50 lb ft). Sleep the Control Arm unit out of the vise and put it back into position. End your process by examining how straight the vehicle's front section is positioned.