How to replace the rear bumper fascia on Buick Park Avenue?

The replacement process of the rear bumper fascia requires first removing the rear compartment sill plate. The fascia retaining nuts located under the rear compartment trim need removal before the fascia can be detached from the quarter panels through its three securing nuts. Mount the vehicle on supports and extract the four screws which maintain the fascia near the wheelhouse areas. The fascia filler panel needs its two push-in retainers taken out after removing marker light sockets from the lamp. To separate the fascia from the rear of the vehicle disconnect the electrical connector of the park assist system if vehicle has this option. Begin the installation process by placing the fascia filler panel then fasten it with push-in retainers . It is essential to reinstall the rear park assist electrical connector when present before installing the rear fascia to the vehicle with a torque of 9 N.m (80 lb in). The four retainers should be installed to the fascia while the fascia needs to be fastened to the quarter panels with nuts. Install the marker lamp sockets to the lens before you put back the rear compartment trim and secure its retainers. Reinstallation of the rear compartment sill plate follows before you lower the vehicle.

OEM Buick Park Avenue Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Bumpers found

View related parts
Buick Park Avenue Bumper Cover Part Number: 25651624
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Bumper Cover Part Number: 25641139
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Replaces: 25616833, 25632917
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Buick Park Avenue | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Bumper Cover, Front Part Number: 25633236
Product Specifications
- Other Name: Fascia-Front Bumper; Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Bumper Cover Part Number: 25616840
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Buick Park Avenue | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Bumper Cover Part Number: 25534978
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Buick Park Avenue | Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Bumper Cover Part Number: 16516340
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Buick Park Avenue | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Bumper Cover, Front Part Number: 16516339
Product Specifications
- Other Name: Fascia-Front Bumper *Prime; Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Buick Park Avenue | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Bumper Cover Part Number: 25700198
$441.68 MSRP: $660.35
You Save: $218.67 (34%)
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Bumper Cover Part Number: 25651625
$286.29 MSRP: $428.02
You Save: $141.73 (34%)
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS

Buick Park Avenue Bumper

Want to cut long-term maintenance and repair costs? Choose OEM Bumper. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Park Avenue parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Park Avenue Bumper includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Buick Park Avenue Bumper Parts and Q&A

Bumper Cover
25651625
Q: How to replace the rear bumper fascia on Buick Park Avenue?
A:
The replacement process of the rear bumper fascia requires first removing the rear compartment sill plate. The fascia retaining nuts located under the rear compartment trim need removal before the fascia can be detached from the quarter panels through its three securing nuts. Mount the vehicle on supports and extract the four screws which maintain the fascia near the wheelhouse areas. The fascia filler panel needs its two push-in retainers taken out after removing marker light sockets from the lamp. To separate the fascia from the rear of the vehicle disconnect the electrical connector of the park assist system if vehicle has this option. Begin the installation process by placing the fascia filler panel then fasten it with push-in retainers . It is essential to reinstall the rear park assist electrical connector when present before installing the rear fascia to the vehicle with a torque of 9 N.m (80 lb in). The four retainers should be installed to the fascia while the fascia needs to be fastened to the quarter panels with nuts. Install the marker lamp sockets to the lens before you put back the rear compartment trim and secure its retainers. Reinstallation of the rear compartment sill plate follows before you lower the vehicle.