How to replace the door moldings on the rear door frame on Buick Park Avenue?

Begin the garnish molding replacement process by removing the door trim panel. The Door Trim Pad and Garnish Clip Remover (J 38778) should be used to remove the push-in retainer which is found at the front lower corner of the garnish molding. Pull the garnish molding from the door frame beginning at the front until you reach the rear. Insert the garnish molding onto the door frame before using the push-in retainer to lock the molding into position. Press the molding into its position while starting from the front and progressing towards the back and then replace the door trim panel.

OEM Buick Park Avenue Door Moldings

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

52 Door Moldings found

View related parts
Buick Park Avenue Body Side Molding, Front Passenger Side Part Number: 12374517
Product Specifications
- Other Name: Molding Kit, Front Side Door; Door Moldings
- Position: Front Passenger Side
- Replaces: 12373390
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Body Side Molding, Front Driver Side Part Number: 12374518
Product Specifications
- Other Name: Molding Kit, Front Side Door; Door Moldings
- Position: Front Driver Side
- Replaces: 12373391
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Lower Molding, Rear Passenger Side Part Number: 25616278
Product Specifications
- Other Name: Molding Assembly-Rear Side Door Lower; Door Moldings; Molding, Rear Side Door
- Position: Rear Lower Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Body Side Molding Insert, Rear Driver Side Part Number: 25635625
Product Specifications
- Other Name: Molding, Rear Side Door
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Edge Guard, Blue; Gray; Red, Passenger Side Part Number: 25664260
Product Specifications
- Other Name: Molding, Door Edge; Door Moldings
- Position: Passenger Side
- Replaces: 25658470, 25658478, 25658476, 25658482, 25658472, 25658468, 25658492, 25658488, 25658486, 25658494, 25627566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Edge Guard, Passenger Side Part Number: 25615086
Product Specifications
- Other Name: Molding, Door Edge; Door Moldings; Molding
- Position: Passenger Side
- Replaces: 25615088, 25616488, 25615052
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Edge Guard, Passenger Side Part Number: 25555010
Product Specifications
- Other Name: Molding, Door Edge; Door Moldings
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Molding, White, Rear Passenger Side Part Number: 25624440
Product Specifications
- Other Name: Molding-Rear Side Door Edge Guard *White; Door Moldings; Molding, Door Edge
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Edge Guard, Driver Side Part Number: 25615053
Product Specifications
- Other Name: Molding, Door Edge; Door Moldings; Molding
- Position: Driver Side
- Replaces: 25615055, 25616489, 25615091, 25615087
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Edge Guard, Passenger Side Part Number: 25615040
Product Specifications
- Other Name: Molding, Door Edge; Door Moldings
- Position: Passenger Side
- Replaces: 25616486, 25615080, 25615042, 25615078, 25615082, 25615084
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Edge Guard, Driver Side Part Number: 25615079
Product Specifications
- Other Name: Molding, Door Edge; Door Moldings
- Position: Driver Side
- Replaces: 25615083, 25615043, 25615033, 25616487, 25615041
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Upper Trim, Rear Driver Side Part Number: 25739147
Product Specifications
- Other Name: Molding, Rear Side Door Trim Finish
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Upper Trim, Rear Passenger Side Part Number: 25739146
Product Specifications
- Other Name: Molding, Rear Side Door Trim Finish
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Lower Molding, Rear Driver Side Part Number: 25616279
Product Specifications
- Other Name: Molding Assembly-Rear Side Door Lower; Door Moldings; Molding, Rear Side Door
- Position: Rear Lower Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Upper Trim, Front Passenger Side Part Number: 25739144
Product Specifications
- Other Name: Molding, Front Door Trim
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Upper Trim, Front Driver Side Part Number: 25739145
Product Specifications
- Other Name: Molding, Front Door Trim
- Position: Front Driver Side
- Replaces: 25670983
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Center Molding, Front Lower Passenger Side Part Number: 25616274
Product Specifications
- Other Name: Molding-Front Side Door Lower; Door Moldings; Molding, Front Side Door
- Position: Front Lower Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Center Molding, Front Lower Driver Side Part Number: 25616275
Product Specifications
- Other Name: Molding-Front Side Door Lower; Door Moldings; Molding, Front Side Door
- Position: Front Lower Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Lower Molding, Rear Center Passenger Side Part Number: 25602358
Product Specifications
- Other Name: Molding Assembly-Rear Side Door Center; Door Moldings; Molding, Rear Side Door
- Position: Rear Center Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Buick Park Avenue | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Park Avenue Lower Molding, Driver Side Part Number: 12503309
Product Specifications
- Other Name: Door Moldings
- Position: Lower Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991 Buick Park Avenue | Ultra | 6 Cyl 3.8 L GAS

| Page 1 of 3 |Next >

1-20 of 52 Results

Buick Park Avenue Door Moldings

Want to cut long-term maintenance and repair costs? Choose OEM Door Moldings. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Park Avenue parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Park Avenue Door Moldings includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Buick Park Avenue Door Moldings are among the vital parts that offer not only the refining but also the strengthening of car parts. Receiving high reviews for its dependability and power, these door moldings play a significant function of shielding the side doors of the Buick Park Avenue from impacts including those that can threaten its exterior in the form of scratches, dents or the likes. Side moldings, door edge guards, belt moldings and rocker panel moldings come as some of the popular and convenient types for automobile; each type is protective with an underlining ability to shield the automotive body and at the same time lend a stylish appeal to the car. Because of its universality for various Park Avenue models, many Buick Park Avenue owners can find the Door Moldings for repair or replacement of wore-out or damaged auto parts to keep up the look and function of the car's door. The fitment is as precise, and installation as simple as can be in addition to that; Buick Park Avenue owners can easily install these additions. Further, the aesthetic criteria are the door moldings give greater efficiency and security to drive the Buick Park Avenue and they prevent the damages of the body of the car in normal use. Options as in the material it is made from like plastic or stainless steel or even chrome plating makes cartridge distinctive in the automotive industry. Finally, the Buick Park Avenue Door Moldings are prone as a prime example of the brand's parts, guaranteeing that each of the Park Avenue is a symbol of quality and strength.

Buick Park Avenue Door Moldings Parts Questions & Experts Answers

Body Side Molding, Rear Passenger Side
12374668
Q: How to replace the door moldings on the rear door frame on Buick Park Avenue?
A:
Begin the garnish molding replacement process by removing the door trim panel. The Door Trim Pad and Garnish Clip Remover (J 38778) should be used to remove the push-in retainer which is found at the front lower corner of the garnish molding. Pull the garnish molding from the door frame beginning at the front until you reach the rear. Insert the garnish molding onto the door frame before using the push-in retainer to lock the molding into position. Press the molding into its position while starting from the front and progressing towards the back and then replace the door trim panel.