The service and repair of the flex plate requires first disconnecting the negative Battery Cable from the battery. Set safety supports underneath the raised vehicle before continuation of work. Proceed to remove the transmission according to the right protocols for automatic or manual transmission systems from the automobile. The first step includes removing the clutch assembly from the
Crankshaft followed by removing the Flywheel from the Crankshaft while removing all burrs at the end of the Crankshaft. Start by installing the Flywheel to the Crankshaft through proper bolt tightening to 90 nm (65 ft. Lbs.), then install the clutch to the Flywheel. The installation of the transmission requires protocol-based reinstallation to the vehicle and must follow automatic or manual transmission procedures. Complete the repair by attaching the battery negative cable to the battery.