How to replace the ABS Control Module on GMC Terrain?

The replacement process for the Brake Pressure Modulator Valve requires turning OFF the ignition switch to protect the EBCM/EBTCM from damage. First disconnect the EBCM electrical connector by pushing up its locking tabs while the accessory wiring junction block remains removed. Use a fitting cap and plug the outlet port on the BPMV after disconnecting the left front brake pipe fitting to avoid brake fluid loss. Follow the same routine for the right front brake pipe fitting and the master cylinder primary brake pipe fitting and secondary brake pipe fitting and the left rear brake pipe fitting and right rear brake pipe fitting while capping and plugging them to stop fluid contamination. Remove the BPMV bolt before carefully pulling the BPMV assembly upward while checking for damage to the insulators. The replacement process requires EBCM removal if the BPMV needs replacement. Reinstallation of the EBCM should be done if it was previously taken out. Install the BPMV assembly to its bracket while installing the BPMV bolt tightly to 10 Nm (89 lb in). Tighten all brake pipe fittings which include the left rear, right rear, master cylinder primary and secondary and left front and right front brake pipe fittings until torque reaches 21 Nm (16 lb ft). PRC system testing passes now you can reconnect the EBCM electrical connector and reinstall the accessory wiring junction block. Start by bleeding the hydraulic brake system followed by turning on the ignition switch. The Diagnostic System Check - Vehicle should evaluate brake pedal feel before running the Antilock Brake System Automated Bleed if pedal feel is identified as spongy.

OEM GMC Terrain ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 ABS Control Modules found

View related parts
GMC Terrain ABS Control Unit Part Number: 84646859
$440.87 MSRP: $827.92
You Save: $387.05 (47%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Electronic Brake Control (W/Brake Pressure Mode; ABS Control Module; Module, Electronic Brake Control
- Replaces: 84342063, 84107317
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Terrain Control Module Part Number: 85105377
$331.50 MSRP: $594.62
You Save: $263.12 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Electronic Brake Control; Module; Module Kit, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Terrain | AT4, Denali, SLE, SLT | 4 Cyl 1.5 L GAS
View related parts
GMC Terrain Control Module Part Number: 84662982
$461.66 MSRP: $835.58
You Save: $373.92 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Electronic Brake Control; ABS Control Module; Module Kit, Electronic Brake Control
- Replaces: 84375587
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2022 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
GMC Terrain Control Module Part Number: 84662981
$337.02 MSRP: $632.90
You Save: $295.88 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Electronic Brake Control; ABS Control Module; Module Kit, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2022 GMC Terrain | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
GMC Terrain Control Module Part Number: 84662980
$264.10 MSRP: $495.94
You Save: $231.84 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Electronic Brake Control; ABS Control Module; Module Kit, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2022 GMC Terrain | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
GMC Terrain Control Module Part Number: 84662979
$335.82 MSRP: $621.30
You Save: $285.48 (46%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Electronic Brake Control (W/Brake Pressure Mode; ABS Control Module; ABS Control Unit; Module, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2022 GMC Terrain | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS
View related parts
GMC Terrain ABS Control Unit Part Number: 84662978
$397.14 MSRP: $770.78
You Save: $373.64 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Electronic Brake Control (W/Brake Pressure Mode; ABS Control Module; Module, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2022 GMC Terrain | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
GMC Terrain ABS Control Unit Part Number: 84646860
$383.48 MSRP: $687.86
You Save: $304.38 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Electronic Brake Control (W/Brake Pressure Mode; ABS Control Module; Module, Electronic Brake Control
- Replaces: 84173926
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2021 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Terrain ABS Control Unit Part Number: 84646858
$451.14 MSRP: $883.28
You Save: $432.14 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Electronic Brake Control (W/Brake Pressure Mode; ABS Control Module; Module, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Terrain Control Module Part Number: 84375587
$461.66 MSRP: $835.58
You Save: $373.92 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Electronic Brake Control; ABS Control Module; Module Kit, Electronic Brake Control
- Replaced by: 84662982
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022, 2019 GMC Terrain | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Terrain Control Module Part Number: 84342065
$305.82 MSRP: $553.52
You Save: $247.70 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Kit-Electronic Brake Control; ABS Control Module; Module Kit, Electronic Brake Control
- Replaces: 84107319
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Terrain Control Module Part Number: 84342064
$238.23 MSRP: $462.34
You Save: $224.11 (49%)
ADD TO CART
Product Specifications
- Other Name: Module Kit-Electronic Brake Control; ABS Control Module; Module Kit, Electronic Brake Control
- Replaces: 84107318
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Terrain Control Module Part Number: 84342062
$473.90 MSRP: $890.68
You Save: $416.78 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Electronic Brake Control (W/Brake Pressure Mode; ABS Control Module; ABS Control Unit; Module, Electronic Brake Control
- Replaces: 84107316
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2022 GMC Terrain | AT4, Denali, SL, SLE, SLT | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
GMC Terrain Control Module Part Number: 22754644
Product Specifications
- Other Name: Module Kit-Electronic Brake & Traction Control; ABS Control Module; Module Kit, Electronic Brake Control; Module, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2017 GMC Terrain | Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
GMC Terrain Control Module Part Number: 20837392
Product Specifications
- Other Name: Module Kit-Electronic Brake & Traction Control; ABS Control Module; Module Kit, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011 GMC Terrain | SLE, SLT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX
View related parts
GMC Terrain Control Module Part Number: 25926937
$329.63 MSRP: $585.62
You Save: $255.99 (44%)
Product Specifications
- Other Name: Module Kit-Electronic Brake & Traction Control; ABS Control Module; Module Kit, Electronic Brake Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010 GMC Terrain | SLE, SLT | 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L GAS

GMC Terrain ABS Control Module

Want to cut long-term maintenance and repair costs? Choose OEM ABS Control Module. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Terrain parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Terrain ABS Control Module includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The ABS Control Module can be described as being a crucial module that helps boost the functionality and effectiveness of the GMC Terrain's anti-lock braking system to a large extent. This module is to test and manage the ABS modulator through wired connection and it helps to avoid any wheel lock during heavy brake application for better control of car. Keeping control on vehicles while avoiding the skidding and similar conditions is therefore of great importance and this can be provided by the ABS Control Module. Suitable for most trims of GMC Terrain, this module is compatible with the car's innovative systems like the wheel speed sensor, valve, and the pump in order to manage brake pressure appropriately. The presence of the electronic stability control (ESC) and traction control features gives ABS Control Module, an added advantage in the market, enabling the drivers to effectively control their vehicles. The GMC Terrain itself is quite unique and stylish and it boasts the usage of fuel-efficient engines which are loved by families. A definite advantage of the GMC Terrain is the technology of the ABS Control Module, which guarantees a comfortable ride and thus enhances the safety of passengers. ABS Control Module is engineered to be as reliable as possible and that has been proven by the engineering put behind the braking system of GMC Terrain. In conclusion, the ABS Control Module is one among other excellent features in GMC automobiles that depict the company's devotion to manufacturing better automobiles.

GMC Terrain ABS Control Module Parts Questions & Experts Answers

Control Module
25926937
Q: How to replace the ABS Control Module on GMC Terrain?
A:
The replacement process for the Brake Pressure Modulator Valve requires turning OFF the ignition switch to protect the EBCM/EBTCM from damage. First disconnect the EBCM electrical connector by pushing up its locking tabs while the accessory wiring junction block remains removed. Use a fitting cap and plug the outlet port on the BPMV after disconnecting the left front brake pipe fitting to avoid brake fluid loss. Follow the same routine for the right front brake pipe fitting and the master cylinder primary brake pipe fitting and secondary brake pipe fitting and the left rear brake pipe fitting and right rear brake pipe fitting while capping and plugging them to stop fluid contamination. Remove the BPMV bolt before carefully pulling the BPMV assembly upward while checking for damage to the insulators. The replacement process requires EBCM removal if the BPMV needs replacement. Reinstallation of the EBCM should be done if it was previously taken out. Install the BPMV assembly to its bracket while installing the BPMV bolt tightly to 10 Nm (89 lb in). Tighten all brake pipe fittings which include the left rear, right rear, master cylinder primary and secondary and left front and right front brake pipe fittings until torque reaches 21 Nm (16 lb ft). PRC system testing passes now you can reconnect the EBCM electrical connector and reinstall the accessory wiring junction block. Start by bleeding the hydraulic brake system followed by turning on the ignition switch. The Diagnostic System Check - Vehicle should evaluate brake pedal feel before running the Antilock Brake System Automated Bleed if pedal feel is identified as spongy.