Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 25713948
Wiper Arm, Passenger Side

1997-2005 Buick Park Avenue

Customer Questions & Expert Answers (6)
GM 25713948 Wiper Arm, Passenger Side
  • Part Description
    Arm, Windshield Wiper Arm
  • Position
    Passenger Side
  • Replaces
    25642728, 25680729, 25695418
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 25713948 Wiper Arm, Passenger Side is Ref No. 1 in the diagram below

    1998 Buick Park Avenue Wiper Arm, Passenger Side Diagram for 25713948
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 25713948

  • Vehicle Fitment

    Year Make Model Trim Engine
    1997-2005 Buick Park AvenueBase, Ultra6 Cyl 3.8 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25713948 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25713948 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the wiper arm on Buick Park Avenue? Posted by Customer
    A:
    You need to power on accy from the Ignition Switch and set the Wiper Switch to delay or auto delay before workshop work begins. Disconnect the washer hose from the connector when the wiper arms sit still at their inner wiping position and you can shut the ignition. Use a permanent marker or tape to show where the Wiper Blade touches the windshield and lift the hood. Take off the nut shield first, then unscrew the nut and Wiper Arm from the same shaft as the drive. When rocking fails to release the Wiper Arm you must use the Wiper Arm puller tool (J 39822). Scrub the Drive Shaft knurling with wire brush before taking off the Wiper Blade from the arm when needed. Before adding the Wiper Arm place the Wiper Blade onto the Drive Shaft alignment. Put the Wiper Arm on the transmission Drive Shaft following the mark made earlier. Put the transmission Drive Shaft nut in place while letting the Wiper Arm move sometime before you tighten the nut to 25 n.m (18 lb ft). Adjust the Wiper Arm position when the nut is loose and it slides away from the alignment mark. Put the washer hose onto the washer hose connector and add windshield washer solvent as a lubricant for easy installation. Perform multiple tests after installation: close the hood, use a cloth to erase position marks from the windshield, use wipers to see the expected movement, and make sure wipers safely park when switched off.
    Posted by ChevyPartsGiant Specialist
    Q:
    How can you mark the position of the wiper blade for the 2005 Buick Park Avenue? Posted by Customer
    A:
    Use a suitable marker or masking tape.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What is the first step to service and repair the wiper arm for the 2000 Buick Park Avenue? Posted by Customer
    A:
    Turn the ignition switch to the ACCY position and set the wiper switch to DELAY or AUTO DELAY.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What should you do if the wiper arm moves away from the alignment mark while tightening the nut for the 2001 Buick Park Avenue? Posted by Customer
    A:
    Loosen the nut and reposition the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    Q:
    What torque should be applied when tightening the nut for the 2002 Buick Park Avenue? Posted by Customer
    A:
    Tighten the nut to 25 N.m (18 lb ft) while holding the wiper arm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Wiper Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Wiper Arm, Passenger Side 25713948 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25713948 Wiper Arm, Passenger Side is available in the market under the name GM Windshield Wiper, Wiper Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25713948 Wiper Arm, Passenger Side fits certain Buick Park Avenue models.
The original GM component designated by manufacturer part number 25713948 maintains top performance when functioning as the Arm, Windshield Wiper Arm unit at its Passenger Side. The component 25713948 is constructed from durable material and its dimensions span 27.2 x 2.2 x 1.4 inches while weighing 1.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 25713948 has available replacement options 25642728, 25680729, 25695418. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.