Make sure this part fits

GM 96062532
Wheel Stud

1998-2000 Chevrolet Metro

Customer Questions & Expert Answers (3)
GM 96062532 Wheel Stud
GM 96062532 Wheel Stud
  • Part Description
    Bolt, Rear Wheel Hub
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2000 Chevrolet MetroBase, LSi3 Cyl 1.0 L GAS, 4 Cyl 1.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Hey, is 96062532 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 96062532 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Wheel Hub Bolt on a hubless design without ABS on Chevrolet Metro? Posted by Customer
    A:
    You need to raise and stabilize your vehicle before starting Wheel Hub Bolt replacement work on a hubless design without anti-lock braking system. First take off the Brake Drum after lifting out both wheels and the tire. A flat-blade tool removes the dust cap before you unstake and take out the washer and Spindle nut. Hit the Brake Drum with a hammer until it starts moving then pull the drum out from the Spindle. Press the Wheel Hub Bolt through the Brake Drum with a hydraulic system and rod. Put the bolt splines into Brake Drum/hub alignment and insert new Wheel Hub Bolt through rod using hydraulic press. Place the wheel drum over the Spindle on top of the washer. Secure it with the Spindle nut by tightening it to 100 nm (74 ft. Lbs.) put the washer in a stamped position while reinstalling the dust cap before lowering the vehicle onto its rear tire and wheel.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace a Wheel Hub Bolt on a hub design with ABS on Chevrolet Metro? Posted by Customer
    A:
    Before starting Wheel Hub Bolt replacement on a hub abs system you must safely elevate and support the vehicle first. Take off the rear tire and wheel before disengaging the two hidden Brake Drum screws. Install two wheel nuts onto two bolts and keep the hub from spinning with a pry bar between them. Push out the Wheel Hub Bolt with the j 6627-a stud remover (J 6627-A). Two wheel nuts should be installed onto two bolts before applying a pry bar to hold the hub stable. Place a fresh bolt onto the hub and put washers underneath it. Twist the wrench onto the wheel nut along with the bolt from the hub until they are secure. After installation remove the wheel nut and washers. Install the Brake Drum and fasten it with two recessed screws. Continue by putting back the tire and wheel unit on the vehicle's rear axle.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Wheel Stud 96062532 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 96062532 Wheel Stud is available in the market under the name GM Wheel Hub Bolt. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 96062532 Wheel Stud fits certain Chevrolet Metro models.
The original GM component designated by manufacturer part number 96062532 maintains top performance when functioning as the Bolt, Rear Wheel Hub unit at its Rear. The component 96062532 is constructed from durable material and its dimensions span 11.4 x 3.0 x 2.6 inches while weighing 1.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Bolt, Rear Axle Shaft Bearing. The part 96062532 has available replacement options. Each vehicle needs 8 units of the part marked as SKU 96062532. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.