Make sure this part fits

GM 94858945
Bracket

1998-2002 Chevrolet Prizm

Customer Questions & Expert Answers (4)
GM 94858945 Bracket
  • Part Description
    Bracket, Front Brake Caliper
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number94858945
    Part DescriptionBracket, Front Brake Caliper
    Other NamesBracket, Wheel Brake Cylinder/Caliper
    Item Dimensions7.3 x 4.5 x 4.3 inches
    Item Weight7.90 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity2
    ManufacturerGeneral Motors
    SKU94858945
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    1998-2002 Chevrolet PrizmBase, LSi4 Cyl 1.8 L GAS
  • Customer Questions & Expert Answers

    Q:
    Hey, is 94858945 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 94858945 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the brake caliper bracket on Chevrolet Prizm? Posted by Customer
    A:
    In order to replace the Brake Caliper Bracket, you will first lift and support the vehicle and then take off the tire and wheel assembly. If properly fitted with an antilock brake system (ABS), then disconnect the bolt holding the abs wheel speed sensor and the sensor from the Steering Knuckle and place the sensor as at the side. Use a c-clamp to compress the front brake caliper after which, complete removal of the 2 caliper guide pin bolts (1,2) making sure that brake components don't hang out on the flexible brake hoses to avoid pinch. Remove the caliper housing from the caliper bracket and suspend it on a wire so as not to damage the brake hose. Next, take off the 2 caliper bracket mounting bolts and the caliper bracket followed by the 2 caliper guide pins, the 2 caliper guide pin seals and the caliper bolt sleeve from the bracket. For installation, lubricate the 2 new guide pin seals with lubriplate lubricant, gm p/n 12346293, or an equivalent nlgi #2 category lb or gc-lb lubricant, then use a 19 mm socket and hammer to install the seals into the caliper bracket , ensuring the metal plate fits snugly. Apply the said lubricant to the 2 guide pins and the caliper bolt sleeve. Insert the guide pin (with the caliper bolt sleeve) in the upper part of caliper bracket and the pin without the sleeve in the lower part. Mount the caliper bracket to the vehicle by screwing in the 2 caliper bracket mounting bolts to 88 nm (65 ft. Lbs.). Mount the caliper onto the caliper bracket, applying lubriplate lubricant, gm p/n 12346293, on the caliper pin bolts while making certain that there is no condition of a fooled brake hose. Replace the two caliper guide pin bolts with a pre-installed torque of 34 nm (25 ft. Lbs.) and then put back the abs wheel speed sensor with the bolt at its new location on the knuckle, with the pre-installed torque of 7.8 nm (69 inch lbs.). Lastly, reinstall the tire and wheal assembly and the vehicle lifted.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the torque specification for securing the caliper bracket for the 2000 Chevrolet Prizm? Posted by Customer
    A:
    Tighten the two caliper bracket mounting bolts to 88 Nm (65 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    Q:
    What is the first step to replace the brake caliper bracket for the 2001 Chevrolet Prizm? Posted by Customer
    A:
    Raise and support the vehicle and remove the tire and wheel assembly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Caliper Bracket
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 94858945, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 94858945 Bracket. It is sometimes referred to as GM Brake Caliper Bracket. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 94858945 Bracket. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery