Make sure this part fits

GM 22611399
Nameplate, Rear

2000-2005 Chevrolet Cavalier

Customer Questions & Expert Answers (9)
GM 22611399 Nameplate, Rear
  • Part Description
    Plate, Rear End Panel And Tailgate
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2005 Chevrolet CavalierLS, LS Sport4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22611399 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22611399 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the emblem/nameplate on the rear compartment lid on Chevrolet Cavalier? Posted by Customer
    A:
    Protection tape must cover the mounting surface before installing new rear compartment lid nameplates and alignment tapes help maintain proper placement. Apply a Heat Gun (J 25070) for thirty seconds while maintaining a 152 mm (6 in) distance to the surface area. Circular motion heating will soften the emblem/nameplate. The emblem/nameplate requires removing carefully through the use of a plastic flat-bladed tool. Body panels require removing adhesive with a 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07501) but plastic panels need a lint-free cloth with Varnish Makers and Painters (VMP) naphtha and a 50/50 isopropyl alcohol and water mixture for adhesive removal. After drying the area the text will be applied to with the same cloth and solution. Install CHEVROLET, CAVALIER LS, CAVALIER 2.4Z, and CHEVY BOW TIE emblems whenever possible, following the defined dimensions when location marks are unavailable. Heat the mounting surface to 80-105°F (27-41°C) using the Heat Gun (J 25070) when appropriate to maintain the emblem/nameplate temperature at 85-90°F (29-32°C). After careful adhesive backing avoidance begin by removing protective film then set the emblem/nameplate at designated markings before firmly applying it to the surface. Complete the installation by removing protective tape from the mounting surface.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to remove and replace the body emblem or nameplate for the 2003 Chevrolet Cavalier? Posted by Customer
    A:
    Begin by washing the panel with soap and water, then wipe it dry.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What temperature range should the body surface, molding, emblem, and name plate be kept at before installation for the 2000 Chevrolet Cavalier? Posted by Customer
    A:
    Keep them at temperatures between 21°-38° C (70°-100°F).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be avoided when handling the emblem/nameplate for the 2002 Chevrolet Cavalier? Posted by Customer
    A:
    Avoid touching the adhesive backing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What tool should be used to remove the emblem/nameplate for the 2004 Chevrolet Cavalier? Posted by Customer
    A:
    Carefully remove the emblem/nameplate using a plastic, flat-bladed tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the first step to replace or repair an emblem/nameplate on the front bumper fascia for the 2003 Chevrolet Cavalier? Posted by Customer
    A:
    Protect the mounting surface with tape and use tape for alignment marks during installation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the new emblem/nameplate be attached for the 2001 Chevrolet Cavalier? Posted by Customer
    A:
    Apply adhesive foam tape to the back of the new emblem/nameplate and press it into place.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How do you remove the emblem/nameplate for the 2005 Chevrolet Cavalier? Posted by Customer
    A:
    Carefully remove it with a plastic, flat-bladed tool.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Nameplate, Rear 22611399 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22611399 Nameplate, Rear is available in the market under the name GM Emblem. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22611399 Nameplate, Rear fits certain Chevrolet Cavalier models.
The original GM component designated by manufacturer part number 22611399 maintains top performance when functioning as the Plate, Rear End Panel And Tailgate unit at its Rear. The component 22611399 is constructed from durable material and its dimensions span 2.2 x 1.5 x 0.4 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Plate,Rear End Panel And Tailgate. The part 22611399 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.