Make sure this part fits

GM 20783372
Window Regulator, Front Driver Side

2007-2017 GM

Customer Questions & Expert Answers (4)
GM 20783372 Window Regulator, Front Driver Side
  • Part Description
    Regulator, Front Door Window Regulator
  • Position
    Front Driver Side
  • Replaces
    25789071
  • Manufacturer
    General Motors
Make sure this part fits
$201.86 MSRP: $368.54
You Save: $166.68 (46%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number20783372
    Part DescriptionRegulator, Front Door Window Regulator
    Other NamesRegulator, Door And End Gate Window; Regulator, Door Inner Control
    Item Dimensions5.1 x 26.3 x 10.4 inches
    Item Weight3.10 Pounds
    PositionFront Driver Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces25789071
    ManufacturerGeneral Motors
    SKU20783372
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2009-2017 Chevrolet TraverseLS, LT, LTZ, Premier6 Cyl 3.6 L GAS
    2007-2016 GMC AcadiaDenali, SL, SLE, SLT6 Cyl 3.6 L GAS
    2017 GMC Acadia LimitedBase6 Cyl 3.6 L GAS
    2007-2010 Saturn OutlookXE, XR6 Cyl 3.6 L GAS
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 20783372 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 20783372 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the front side door window regulator on GMC Acadia? Posted by Customer
    A:
    The door trim panel along with the water deflector must be removed before starting to replace the front side door Window Regulator. Begin by disassembly of the energy absorber retainers and absorber before removing the two bolting plates which hide the regulator holes. You should loosen the three bolts which connect window guide to regulator and then elevate the window to reach its maximum upward position. Detach the electrical connector from the regulator motor followed by loosening the upper bolt holding it to the upper inner door area. First remove the motor securing nut from the door then go ahead and take out the lower bolt . Raise the regulator/motor upward until the upper bolts uncover from the door then normalize the upper assembly forward. The lower portion of the regulator passes through the door opening first for removal and the upper bolt on the regulator can be removed next. The new regulator will receive the power Window Motor from the old one. To install the regulator place the upper bolt half-installed on the regulator as you gently feed it through the door opening oriented at a semi-horizontal angle before positioning it fully forward into the door cavity and rotating it to reach its vertical position. Proceed to mount the regulator on the door sheet metal by using the existing upper bolt. Then untether the window support before financially positioning the window on the regulator guide. Tighten the regulator carrier bolts only slightly before elevating the window to its maximum position while keeping it inside the channels properly. Fasten the retaining nut holding the motor to the door while tightening it to 9 n.m (80 lb in). Use bolts (1, 4) to attach the regulator to the door before tightening them to 10 n.m (88 loc in). Attach the electrical connector to the regulator motor followed by energy absorber retainer and absorber installation on the door and completing with regulator bolt hole covers together with water deflector and door trim panel.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step in the installation process for the 2010 Chevrolet Traverse? Posted by Customer
    A:
    Transfer the window regulator motor to the regulator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    Q:
    How should the window be positioned during the process for the 2007 GMC Acadia? Posted by Customer
    A:
    Raise and support the window in the full up position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Window Regulator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 20783372, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 20783372 Window Regulator, Front Driver Side. It is sometimes referred to as GM Window Regulator. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 20783372 Window Regulator, Front Driver Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery