Make sure this part fits

GM 15127010
Upper Insulator, Front

2001-2007 GM

Customer Questions & Expert Answers (2)
GM 15127010 Upper Insulator, Front
  • Part Description
    Insulator Assembly-Drivetrain & Front Suspension Frame U
  • Position
    Front
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15127010 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15127010 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to service and repair the rear Crossmember Bushing on Buick Rendezvous? Posted by Customer
    A:
    Start the replacement procedure of the rear cross-member bushing by lifting the vehicle through a wheel lift hoist. A few sections of vehicle weight need support at jacking points using utility stands. First remove the rear shock absorbers followed by disconnecting the right-hand brake cable from its position on the left guide loop. Before servicing any all-wheel drive vehicle disconnect the electrical connector from the rear differential clutch pump check valve. Both abs wiring harnesses must be taken from the frame rails and the brake hose mounting bolts from the body brackets. After disconnecting the automatic level control (ALC) height sensor harness connector users should lower the rear wheel lift hoist to partially unload the suspension system. Lower and assist in rotating the Rear Crossmember behind so its front mount reaches 114 mm (4 1/2 inch) while fitting the bushing removal/installation tool. The frame mount installer/receiver (J45677) should be used for Rear Crossmember frame mount removal. During new frame mount installation ensure the voids face in the direction of the vehicle's front and using j45677 as the installation tool for proper orientation. The Rear Crossmember should be placed under guidance from a helper who controls the hoist lift. Secure the rear suspension crossmember mounting bolts with tension at 130 nm (96 ft. Lbs.). The alc height sensor harness connector needs to reconnect for all wiring harnesses must be placed on the frame rails followed by connecting the electrical connector to the rear differential clutch pump check valve for associated vehicles with all-wheel drive. Both the right-hand park brake cable and brake hose mounting bolts must be installed into their respective positions at the left guide loop and body brackets. The last steps include reinstalling rear shock absorbers followed by taking out the utility stands before lowering the vehicle to check the rear suspension toe alignment with adjustments as needed.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Upper Insulator, Front 15127010 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15127010 Upper Insulator, Front is available in the market under the name GM Crossmember Bushing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15127010 Upper Insulator, Front fits certain Buick Rendezvous models, as well as Pontiac Aztek models.
The original GM component designated by manufacturer part number 15127010 maintains top performance when functioning as the Insulator Assembly-Drivetrain & Front Suspension Frame U unit at its Front. The component 15127010 is constructed from durable material and its dimensions span 4.3 x 4.3 x 2.2 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Insulator, Body To Frame Mounting. The part 15127010 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 15127010. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.