Make sure this part fits

GM 22915138
Return Hose

2007-2017 GM

Customer Questions & Expert Answers (13)
GM 22915138 Return Hose
  • Part Description
    Pipe, Steering Fluid Cooler; Power Steering Hose
  • Replaces
    15869853, 25876164, 25840979
  • Manufacturer
    General Motors
Make sure this part fits
$40.21 MSRP: $66.25
You Save: $26.04 (40%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2017 Buick EnclaveBase, Convenience, CX, CXL, Leather, Premium6 Cyl 3.6 L GAS
    2009-2017 Chevrolet TraverseLS, LT, LTZ, Premier6 Cyl 3.6 L GAS
    2007-2016 GMC AcadiaDenali, SL, SLE, SLT6 Cyl 3.6 L GAS
    2017 GMC Acadia LimitedBase6 Cyl 3.6 L GAS
    2007-2010 Saturn OutlookXE, XR6 Cyl 3.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 22915138 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 22915138 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be done after connecting the power steering gear inlet hose to the power steering pump for the 2008 Buick Enclave? Posted by Customer
    A:
    Install the hose bracket and bolt tightened to 8 N.m (71 lb in) and the bracket nut tightened to 8 N.m (71 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after installing the new outlet hose for the 2010 Buick Enclave? Posted by Customer
    A:
    Clean any excess fluid from the vehicle and remove the drain pans before filling and bleeding the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after removing the fuel injector sight shield for the 2009 Buick Enclave? Posted by Customer
    A:
    Drain as much power steering fluid from the remote power steering fluid reservoir as possible and place drain pans under the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the power steering fluid reservoir outlet hose for the 2008 Buick Enclave? Posted by Customer
    A:
    First, remove the fuel injector sight shield.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after removing the power steering cooler pipe for the 2009 Buick Enclave? Posted by Customer
    A:
    Remove the power steering cooler pipe from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after connecting the power steering cooler pipe to the outlet hose for the 2007 GMC Acadia? Posted by Customer
    A:
    Connect the power steering cooler pipe to the power steering fluid cooler and tighten the power steering cooler pipe clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step in the installation process for the 2009 Chevrolet Traverse? Posted by Customer
    A:
    Position the new power steering cooler pipe and install a new power steering cooler pipe clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after reconnecting the power steering fluid reservoir outlet hose for the 2010 GMC Acadia? Posted by Customer
    A:
    Clip it to the power steering gear inlet hose bracket.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the procedure for installing the power steering gear inlet hose for the 2007 GMC Acadia? Posted by Customer
    A:
    Install the power steering gear inlet hose from underneath the vehicle, inserting the end into the steering gear, and secure it with the retaining plate bolt tightened to 9 N.m (80 lb in) and the inlet and outlet pipe clip bolt also tightened to 9 N.m (80 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after removing the old hose for the 2007 GMC Acadia? Posted by Customer
    A:
    Install the new power steering fluid reservoir outlet hose, connecting it to the power steering pump and the remote power steering fluid reservoir, while ensuring the hose is clipped in place according to its original routing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be disconnected from the power steering gear outlet hose for the 2010 Chevrolet Traverse? Posted by Customer
    A:
    The power steering cooler pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after reinstalling the frame components for the 2008 GMC Acadia? Posted by Customer
    A:
    Clean any excess fluid, reinstall the steering gear heat shields, right side catalytic converter, frame brace, and underbody rear side rails, and if equipped, the rear propeller shaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Return Hose 22915138 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 22915138 Return Hose is available in the market under the name GM Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 22915138 Return Hose fits certain Chevrolet Traverse models, as well as GMC Acadia, Acadia Limited. Additionally, it is compatible with Buick Enclave and Saturn Outlook models.
The original GM component designated by manufacturer part number 22915138 maintains top performance when functioning as the Pipe, Steering Fluid Cooler; Power Steering Hose unit. The component 22915138 is constructed from durable material and its dimensions span 25.4 x 7.1 x 5.6 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Lower Return Tube. The part 22915138 has available replacement options 15869853, 25876164, 25840979. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.