Make sure this part fits

GM 15008297
Emblem, Front

1998-2005 GM

Customer Questions & Expert Answers (10)
GM 15008297 Emblem, Front
  • Part Description
    Plate, Front Side Door Name
  • Position
    Front
  • Manufacturer
    General Motors
Make sure this part fits
$13.11 MSRP: $18.75
You Save: $5.64 (31%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2000-2003 Chevrolet VentureLT6 Cyl 3.4 L GAS
    1998-2005 GMC SafariBase, SL, SLE, SLT, SLX6 Cyl 4.3 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15008297 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15008297 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace or repair an emblem/nameplate on the liftgate on Chevrolet Venture? Posted by Customer
    A:
    The first step when installing a new liftgate emblem is to cover the mounting area with tape and mark surface alignment using additional tape. Warm the emblem/nameplate with J 25070 Heat Gun at 152 mm (6 in) distance for 30 seconds while rotating the tool in a circular pattern. Use a plastic flatblade tool to properly take off the emblem/nameplate. You can use a 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07501) for body panels and a lint-free cloth with VMP naphtha mixture or 50/50 isopropyl alcohol and water for plastic panels. Wipe the installation area with the same cloth and solvent mixture before completely drying it. Place tape at the chosen installation site if there are no markings present. Affix the CHEVROLET, VENTURE, PONTIAC VERSATRAK AWD, WB, THUNDER, OLDSMOBILE, and SILHOUETTE emblems/nameplates in their correct dimensions when the surface temperature reaches 27-41°C (80-105°F) during J 25070 Heat Gun (J 25070) use and keep the emblem/nameplate temperature at 29-32°C (85-90°F). Put the emblem/nameplate onto its required placement while matching its marks and apply force to get a solid bond. After that put the emblem/nameplate on by pressing it evenly into the attachment spot.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the mounting area be prepared for the 2000 GMC Safari? Posted by Customer
    A:
    Clean the mounting area with a suitable solvent, such as a mixture of 50 percent isopropyl alcohol and 50 percent water, and dry it thoroughly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be avoided when handling the emblem/nameplate for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Avoid touching the adhesive backing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the method to remove emblems for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Use a heating gun positioned 152 mm (6 in) from the surface, applying heat in a circular motion for 30 seconds without damaging the paint.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What should be done if the location has not been marked for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Apply tape and mark it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What solvent mixture is recommended for cleaning the mounting area for the 2004 GMC Safari? Posted by Customer
    A:
    A 50 percent isopropyl alcohol and 50 percent water mixture.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How do you install the new grille emblem for the 2000 GMC Safari? Posted by Customer
    A:
    Attach the grille emblem to the grille, ensuring to follow the Fastener Notice in Cautions and Notices.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    What is the final step after securing the emblem for the 2001 GMC Safari? Posted by Customer
    A:
    Finally, reinstall the grille onto the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    Q:
    How should the grille be protected during the emblem removal for the 2004 GMC Safari? Posted by Customer
    A:
    Protect the face of the grille while taking off the emblem.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Emblem
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Emblem, Front 15008297 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15008297 Emblem, Front is available in the market under the name GM Emblem. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15008297 Emblem, Front fits certain Chevrolet Venture models, as well as GMC Safari models.
The original GM component designated by manufacturer part number 15008297 maintains top performance when functioning as the Plate, Front Side Door Name unit at its Front. The component 15008297 is constructed from durable material and its dimensions span 3.4 x 1.6 x 0.4 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Nameplate; Plate Assembly, Cab And Load Carrier Outer Side Decoration; Plate, Rear Quarter Panel. The part 15008297 has available replacement options. Each vehicle needs 2 units of the part marked as SKU 15008297. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.