How to service the Light Control Module on 2000 Buick Park Avenue?

The Lamp Control Module service requires initial removal of the lower IP trim panel followed by detachment of the three mounting bolts from the Instrument Panel back. You should disconnect electrical connectors from the LCM. Reconnect the electrical connectors to the LCM then line up the LCM holes with the instrument panel back before bolt installation completes the procedure. The service completion requires installing the lower IP trim panel.

OEM 2000 Buick Park Avenue Light Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Light Control Module found

View related parts
2000 Buick Park Avenue Sentinel Module
Part Number: 25628664
Product Specifications
- Other Name: Module Assembly-Headlamp Auto Control; Module; Module, Headlamp/Fog Lamp/Turn Signal
- Item Weight: 0.90 Pounds
- Item Dimensions: 9.0 x 4.9 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25628664
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2000 Buick Park Avenue Light Control Module

With a comprehensive array of OEM 2000 Buick Park Avenue Light Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Park Avenue Light Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Park Avenue Parts Questions & Experts Answers

Q: How to service the Light Control Module on 2000 Buick Park Avenue?
A: The Lamp Control Module service requires initial removal of the lower IP trim panel followed by detachment of the three mounting bolts from the Instrument Panel back. You should disconnect electrical connectors from the LCM. Reconnect the electrical connectors to the LCM then line up the LCM holes with the instrument panel back before bolt installation completes the procedure. The service completion requires installing the lower IP trim panel.