How to replace the Tail Light on 2000 Buick Park Avenue?

Starting the tail lamp replacement requires removal of the rear compartment sill plate followed by disconnecting the electrical connector. Differentiate the taillamp from the vehicle with three attached nuts. Use pliers to remove the grommet on the rear end panel in order to detach the taillamp completely. The bulb and socket disconnect from the taillamp by turning counterclockwise while releasing the tang until they separate. After this, pull the bulb from its socket. Installation begins by inserting the bulb into its socket and using clockwise movement to lock both socket and bulb into position with the lamp. You must install the grommet inside the rear end panel until it sits properly before you secure the taillamp to the vehicle using the three nuts. Once the electrical connector is reattached the installation concludes by reinstalling the rear compartment sill plate.

OEM 2000 Buick Park Avenue Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Tail Lights found

View related parts
2000 Buick Park Avenue Tail Lamp Assembly, Driver Side
Part Number: 16525981
Product Specifications
- Other Name: Lamp Assembly, Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Item Weight: 2.20 Pounds
- Item Dimensions: 13.1 x 13.0 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16525981
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2000 Buick Park Avenue Tail Lamp Assembly, Passenger Side
Part Number: 16525982
Product Specifications
- Other Name: Lamp Assembly, Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Item Weight: 2.40 Pounds
- Item Dimensions: 13.0 x 12.9 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16525982
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
2000 Buick Park Avenue Backup Lamp Assembly
Part Number: 16525987
$139.21 MSRP: $208.12
You Save: $68.91 (34%)
Product Specifications
- Other Name: Lamp Assembly, Back Up & Tail *W/O Argent; Lamp, Back Up Lamp
- Item Weight: 11.80 Pounds
- Item Dimensions: 52.1 x 11.9 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16525987
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2000 Buick Park Avenue Tail Light

With a comprehensive array of OEM 2000 Buick Park Avenue Tail Light, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Buick Park Avenue Tail Light are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Buick Park Avenue Parts Questions & Experts Answers

Q: How to replace the Tail Light on 2000 Buick Park Avenue?
A: Starting the tail lamp replacement requires removal of the rear compartment sill plate followed by disconnecting the electrical connector. Differentiate the taillamp from the vehicle with three attached nuts. Use pliers to remove the grommet on the rear end panel in order to detach the taillamp completely. The bulb and socket disconnect from the taillamp by turning counterclockwise while releasing the tang until they separate. After this, pull the bulb from its socket. Installation begins by inserting the bulb into its socket and using clockwise movement to lock both socket and bulb into position with the lamp. You must install the grommet inside the rear end panel until it sits properly before you secure the taillamp to the vehicle using the three nuts. Once the electrical connector is reattached the installation concludes by reinstalling the rear compartment sill plate.