How to replace the power seat switch on 2000 Chevrolet Malibu?

The power seat switch replacement process begins by removing the recliner handle from the seat back followed by the outer panel of the seat cushion. The first step is to remove the seat power switch electrical connector after which you should extract the seat power switch. You should start by installing the seat power switch then secure its screws at 1 N.m (9 lb in). The second part of this step requires resetting the electrical connector after which you install the seat cushion outer trim panel and fasten its screws to 1 N.m (9 lb in). Reinstall the seat back recliner handle along with its screws while ensuring they reach 1 N.m (9 lb in).

OEM 2000 Chevrolet Malibu Seat Switch

Seat Adjust Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Seat Switch found

View related parts
2000 Chevrolet Malibu Seat Switch, Front Passenger Side
Part Number: 16788713
Product Specifications
- Other Name: Switch, Front Seat Adjuster; Power Seat Switch; Switch
- Position: Front Passenger Side
- Item Weight: 0.70 Pounds
- Item Dimensions: 12.2 x 4.7 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 16788713
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Malibu Submodels:
- Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS

2000 Chevrolet Malibu Seat Switch

With a comprehensive array of OEM 2000 Chevrolet Malibu Seat Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Malibu Seat Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Malibu Seat Switch Parts Questions & Experts Answers

Q: How to replace the power seat switch on 2000 Chevrolet Malibu?
A: The power seat switch replacement process begins by removing the recliner handle from the seat back followed by the outer panel of the seat cushion. The first step is to remove the seat power switch electrical connector after which you should extract the seat power switch. You should start by installing the seat power switch then secure its screws at 1 N.m (9 lb in). The second part of this step requires resetting the electrical connector after which you install the seat cushion outer trim panel and fasten its screws to 1 N.m (9 lb in). Reinstall the seat back recliner handle along with its screws while ensuring they reach 1 N.m (9 lb in).