How to service the Mass Air Flow Sensor on 2000 Chevrolet Tracker?

For servicing mass air flow (MAF) sensor, first detach the intake manifold air inlet duct. Next, remove the maf sensor electrical connector and pry out the two maf sensor bracket bolts. Follow that by removing the maf sensor from the air filter housing. For installation, return the maf sensor back to the air filter housing and attach it using the 2 bolts that should be tightened to 10 n.m (89 lb in). Then reconnect the maf sensor electrical connector , and lastly put back the intake manifold air inlet duct .

OEM 2000 Chevrolet Tracker Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mass Air Flow Sensor found

View related parts
2000 Chevrolet Tracker Mass Air Flow Sensor Part Number: 30020654
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Sensor Assembly; Air Mass Sensor
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.1 x 8.5 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30020654
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS

2000 Chevrolet Tracker Mass Air Flow Sensor

With a comprehensive array of OEM 2000 Chevrolet Tracker Mass Air Flow Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Tracker Mass Air Flow Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Tracker Mass Air Flow Sensor Parts and Q&A

Q: How to service the Mass Air Flow Sensor on 2000 Chevrolet Tracker?
A: For servicing mass air flow (MAF) sensor, first detach the intake manifold air inlet duct. Next, remove the maf sensor electrical connector and pry out the two maf sensor bracket bolts. Follow that by removing the maf sensor from the air filter housing. For installation, return the maf sensor back to the air filter housing and attach it using the 2 bolts that should be tightened to 10 n.m (89 lb in). Then reconnect the maf sensor electrical connector , and lastly put back the intake manifold air inlet duct .

Related 2000 Chevrolet Tracker Parts

Alternate Year Models

1999 Chevrolet Tracker Mass Air Flow Sensor 2001 Chevrolet Tracker Mass Air Flow Sensor