How to replace the front windshield washer pump on 2000 Chevrolet Tracker?

To swap the windshield washer pump you must unplug its electrical connector then loosen and remove the three holding bolts from the washer solvent pot. Empty washer fluid from the container through a drain pan before taking off both pieces of equipment from the washer pump assembly. After fitting the washer pump onto solvent storage you should rejoin the washer nozzle hose with the pump. Secure the washer solvent container by inserting its 3 bolts and tightening them to 115 lb in (13 N.m). After connecting the electrical pump connector you must fill up the washer fluid tank as required.

OEM 2000 Chevrolet Tracker Washer Pump

Windshield Washer Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Pump found

View related parts
2000 Chevrolet Tracker Washer Pump
Part Number: 96055749
Product Specifications
- Other Name: Pump; Washer Pump Repair Kit; Windshield Washer Pump; Pump, Windshield Washer Pump; Pump, Rear Window Wiper; Pump, Windshield Washer
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.5 x 2.3 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96055749
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2000 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

2000 Chevrolet Tracker Washer Pump

With a comprehensive array of OEM 2000 Chevrolet Tracker Washer Pump, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2000 Chevrolet Tracker Washer Pump are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2000 Chevrolet Tracker Washer Pump Parts Questions & Experts Answers

Q: How to replace the front windshield washer pump on 2000 Chevrolet Tracker?
A: To swap the windshield washer pump you must unplug its electrical connector then loosen and remove the three holding bolts from the washer solvent pot. Empty washer fluid from the container through a drain pan before taking off both pieces of equipment from the washer pump assembly. After fitting the washer pump onto solvent storage you should rejoin the washer nozzle hose with the pump. Secure the washer solvent container by inserting its 3 bolts and tightening them to 115 lb in (13 N.m). After connecting the electrical pump connector you must fill up the washer fluid tank as required.

Related 2000 Chevrolet Tracker Parts

Alternate Year Models

1999 Chevrolet Tracker Washer Pump 2001 Chevrolet Tracker Washer Pump