OEM 2001 Cadillac Seville Washer Reservoir

2001 Cadillac Seville Parts Questions & Experts Answers

• Q: How to replace the front washer reservoir on 2001 Cadillac Seville?

  A: Start the washer fluid solvent replacement by removing the support bar that holds the hood in place. Push the release tab inside the washer hose so you can pull the washer nozzle tube from its position. First disconnect the washer fluid sensor electric wires then remove headlamp Washer Pump wires. Take all three retainers from the front Bumper cover and lift it straight up before you can see and access the top washer bottle retainers. Unfasten all four headlamp washer bottle retainers at their left and right top and bottom points before lifting the headlamp washer bottle out of its place. Put the washer bottle in its position again and push up on the front Bumper cover to insert the upper retainers. Put back the three Bumper cover retainers before linking the electrical connector of the headlamp Washer Pump. Insert both lower retainers into headlamp washer bottle areas and join the level sensor power connector while pressing the headlamp washer hose ends together with proper alignment. Finish the job by putting back the hood latch support and make minor adjustments to the hood latch.