OEM 2001 Chevrolet Malibu Hood Cable

2001 Chevrolet Malibu Hood Cable Parts Questions & Experts Answers

• Q: How to replace the Hood Cable on 2001 Chevrolet Malibu?

  A: First disconnect the Hood Cable from the Hood Latch by pressing the retainer on the Hood Cable. Remove the radiator support panel Hood Cable retainer before taking off the left sound insulator panel and the left front carpet retainer. To reach the Hood Cable grommet you should fold down the carpet so you can remove the Hood Cable screw from the handle and handle from the front hinge pillar. By pressing on the tabs you can disconnect the Hood Cable from its handle position while keeping the end wire or string inside the passenger area. A wire and string should be tied to the end of the Hood Cable for assisting with cable replacement. Pull the grommet through the passenger compartment while cleaning the instrument panel hole of old sealant. First remove the Hood Cable from the instrument panel before removing the wire or string from the Hood Cable. The new Hood Cable needs to be installed through the instrument panel hole by tying a wire or string to it. Apply sealer to the grommet while pulling it through the engine compartment until it settles into place in the instrument panel hole before extracting the wire or string from the Hood Cable. Use the radiator support panel retainer to install the Hood Cable while also connecting it to the Hood Latch and handle before mounting the cable handle to the hinge pillar. Secure the screw that holds the Hood Cable with a torque of 2.5 n.m (22 lb in). Replace the left sound insulator panel followed by reinstalling the left front carpet retainer and grille before returning the carpet to its original position.