How to Replace Canister Purge Valves on 2002 Buick Park Avenue?

In order to install the EVAP canister purge valves, it is necessary to remove the fuel injector sight shield, harness connector, harness vacuum hoses, as well as the purge pipe. This is done by unlocking the tab to take out the valves. Installation To install the valves are repositioned, the purge pipe and the harness connector are reconnected and the sight shield reattached.

OEM 2002 Buick Park Avenue Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valves found

View related parts
2002 Buick Park Avenue Solenoid Valve Part Number: 1997278
$35.15 MSRP: $69.54
You Save: $34.39 (50%)
ADD TO CART
Product Specifications
- Other Name: Valve, Evaporator; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Valve; Purge Solenoid; Purge Control Valve; Solenoid; Valve, Fuel Tank Evaporator/Purge Control
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.7 x 2.9 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1997278
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2002 Buick Park Avenue Canister Purge Valves

With a comprehensive array of OEM 2002 Buick Park Avenue Canister Purge Valves, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Buick Park Avenue Canister Purge Valves are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Buick Park Avenue Canister Purge Valves Parts and Q&A

Q: How to Replace Canister Purge Valves on 2002 Buick Park Avenue?
A: In order to install the EVAP canister purge valves, it is necessary to remove the fuel injector sight shield, harness connector, harness vacuum hoses, as well as the purge pipe. This is done by unlocking the tab to take out the valves. Installation To install the valves are repositioned, the purge pipe and the harness connector are reconnected and the sight shield reattached.