OEM 2002 Buick Park Avenue Crankshaft Position Sensor

2002 Buick Park Avenue Parts Questions & Experts Answers

• Q: How to replace the Crankshaft Position Sensor on 2002 Buick Park Avenue?

  A: During the replacement of the crankshaft position (CKP) sensor, one must first remove the negative cable from the battery, and raise the car on a hoist. Now, take off the right splash shield cover, and the crankshaft Harmonic Balancer. Gently remove the Crankshaft Position Sensor shield without using a pry bar; after that remove the sensor electrical connector. In the process, remove the two attaching bolts from the Crankshaft Position Sensor and pull it off the block face. For the installation. Apply the crankshaft (CKP) sensor to the block; install bolt attaching. Tighten to 30 n.m (22 lb ft). Re-install the Crankshaft Position Sensor shield and plug the ckp sensor electric connector. Put back the Harmonic Balancer crankshaft in its proper position on the crankshaft, install the right splash cover, lower the car, and reattach the negative Battery Cable. Finally, conduct the crankshaft position (CKP) system variation learn procedure.