How to service the Light Control Module on 2002 Buick Park Avenue?

Begin Lamp Control Module servicing by first removing the lower IP trim panel followed by removing the two fasteners securing the heater A/C duct then relocating the duct from the installation site so one can access the panel dimming control module bracket. First remove three fasteners holding the lamp control module bracket onto the instrument panel before releasing the two electrical connectors from the lamp control module. Set up the Lamp Control Module by connecting its electrical connectors followed by installing the bracket to the instrument panel then placing the heater A/C duct back into position with the two fasteners in place before returning the lower IP trim panel.

OEM 2002 Buick Park Avenue Light Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Light Control Module found

View related parts
2002 Buick Park Avenue Sentinel Module Part Number: 25628664
Product Specifications
- Other Name: Module Assembly-Headlamp Auto Control; Module; Module, Headlamp/Fog Lamp/Turn Signal
- Item Weight: 0.90 Pounds
- Item Dimensions: 9.0 x 4.9 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25628664
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2002 Buick Park Avenue Light Control Module

With a comprehensive array of OEM 2002 Buick Park Avenue Light Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Buick Park Avenue Light Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Buick Park Avenue Light Control Module Parts and Q&A

Q: How to service the Light Control Module on 2002 Buick Park Avenue?
A: Begin Lamp Control Module servicing by first removing the lower IP trim panel followed by removing the two fasteners securing the heater A/C duct then relocating the duct from the installation site so one can access the panel dimming control module bracket. First remove three fasteners holding the lamp control module bracket onto the instrument panel before releasing the two electrical connectors from the lamp control module. Set up the Lamp Control Module by connecting its electrical connectors followed by installing the bracket to the instrument panel then placing the heater A/C duct back into position with the two fasteners in place before returning the lower IP trim panel.