How to replace the brake master cylinder on 2002 Chevrolet S10?

To start replacing the brake master cylinder, use the parking brake and block the wheels. Separate the brake pipes from the master cylinder and cover the bare pipe ends with rubber caps or plugs so brake fluid does not leak out and get contaminated. After blocking the brake pipe openings, loosen the master cylinder nuts and bolts and take it out. Take out all brake fluid from the master cylinder reservoir. Then, you should bleed the master cylinder on the bench and reinstall it into the car. After you install and tighten the master cylinder bolts and nuts to 36 Nm, connect the brake pipes and tighten their nuts to 30 Nm. In the end, bleed the hydraulic brake system.

OEM 2002 Chevrolet S10 Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Master Cylinder found

View related parts
2002 Chevrolet S10 Master Cylinder Part Number: 19209269
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 18042802, 18060793
- Item Weight: 2.30 Pounds
- Item Dimensions: 9.6 x 7.5 x 9.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19209269
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

2002 Chevrolet S10 Brake Master Cylinder

With a comprehensive array of OEM 2002 Chevrolet S10 Brake Master Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet S10 Brake Master Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet S10 Brake Master Cylinder Parts and Q&A

Q: How to replace the brake master cylinder on 2002 Chevrolet S10?
A: To start replacing the brake master cylinder, use the parking brake and block the wheels. Separate the brake pipes from the master cylinder and cover the bare pipe ends with rubber caps or plugs so brake fluid does not leak out and get contaminated. After blocking the brake pipe openings, loosen the master cylinder nuts and bolts and take it out. Take out all brake fluid from the master cylinder reservoir. Then, you should bleed the master cylinder on the bench and reinstall it into the car. After you install and tighten the master cylinder bolts and nuts to 36 Nm, connect the brake pipes and tighten their nuts to 30 Nm. In the end, bleed the hydraulic brake system.