What tools are required to service and repair the crankshaft gear and sprocket on 2002 Chevrolet S10?

One should use the Crankshaft Gear Remover and Installer to service the crankshaft gear and the sprocket. Take out the engine front cover and crankshaft position sensor reluctor ring. Check timing marks by rotating the engine and taking off the camshaft sprocket and timing chain. Wipe down everything, check wear and reassemble after aligning correctly. Lastly re-fit engine front cover.

OEM 2002 Chevrolet S10 Crankshaft Gear

Crankshaft Timing Gear

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Gear found

View related parts
2002 Chevrolet S10 Crankshaft Gear Part Number: 10083171
Product Specifications
- Other Name: Sprocket, Engine Crankshaft/Timing; Timing Gear; Timing Gear Set
- Item Weight: 0.70 Pounds
- Item Dimensions: 3.1 x 3.1 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10083171
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet S10 Submodels:
- Base, LS, Xtreme | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS

2002 Chevrolet S10 Crankshaft Gear

With a comprehensive array of OEM 2002 Chevrolet S10 Crankshaft Gear, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet S10 Crankshaft Gear are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet S10 Crankshaft Gear Parts and Q&A

Q: What tools are required to service and repair the crankshaft gear and sprocket on 2002 Chevrolet S10?
A: One should use the Crankshaft Gear Remover and Installer to service the crankshaft gear and the sprocket. Take out the engine front cover and crankshaft position sensor reluctor ring. Check timing marks by rotating the engine and taking off the camshaft sprocket and timing chain. Wipe down everything, check wear and reassemble after aligning correctly. Lastly re-fit engine front cover.