How to replace the canister purge valves on 2002 Chevrolet Tahoe?

In order to replace the EVAP canister purge valves, take off the engine sight shield and disintegrate the EVAP pipe and electrical connector to the EVAP purge solenoid. Disassemble the solenoid and insulator, install the new valves and re-connect it all. Lastly, place the engine sight shield again.

OEM 2002 Chevrolet Tahoe Canister Purge Valves

Fuel Tank Evaporator Purge Control Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valves found

View related parts
2002 Chevrolet Tahoe Purge Valve Part Number: 1997279
$40.09 MSRP: $74.80
You Save: $34.71 (47%)
ADD TO CART
Product Specifications
- Other Name: Valve, Evaporator Emission Canister Purge Solenoid; Vapor Canister Purge and Vent Solenoid.; Purge Solenoid; Purge Control Valve; Valve, Fuel Tank Evaporator/Purge Control
- Item Weight: 0.60 Pounds
- Item Dimensions: 4.6 x 2.9 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1997279
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2002 Chevrolet Tahoe Submodels:
- Base, LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

2002 Chevrolet Tahoe Canister Purge Valves

With a comprehensive array of OEM 2002 Chevrolet Tahoe Canister Purge Valves, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2002 Chevrolet Tahoe Canister Purge Valves are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2002 Chevrolet Tahoe Canister Purge Valves Parts and Q&A

Q: How to replace the canister purge valves on 2002 Chevrolet Tahoe?
A: In order to replace the EVAP canister purge valves, take off the engine sight shield and disintegrate the EVAP pipe and electrical connector to the EVAP purge solenoid. Disassemble the solenoid and insulator, install the new valves and re-connect it all. Lastly, place the engine sight shield again.