How to replace the multifunction turn signal switch on 2003 Buick Park Avenue?

To replace the turn signal switch, switch off the SIR system and remove the trim covers. Disconnect the harness wire assembly and turn signal switch connector. Take out the switch assembly from the steering column. Install new assembly, fasten it, reconnect the needed objects before attaching the trim covers.

OEM 2003 Buick Park Avenue Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Switch found

View related parts
2003 Buick Park Avenue Multifunction Switch Part Number: 88964587
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Switch; Combination Switch; Switch, Windshield Wiper Control; Switch, Turn Signal Lamp
- Replaces: 26067713, 26077759
- Item Weight: 1.30 Pounds
- Item Dimensions: 6.1 x 6.3 x 11.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88964587
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2003 Buick Park Avenue Turn Signal Switch

With a comprehensive array of OEM 2003 Buick Park Avenue Turn Signal Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick Park Avenue Turn Signal Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick Park Avenue Turn Signal Switch Parts and Q&A

Q: How to replace the multifunction turn signal switch on 2003 Buick Park Avenue?
A: To replace the turn signal switch, switch off the SIR system and remove the trim covers. Disconnect the harness wire assembly and turn signal switch connector. Take out the switch assembly from the steering column. Install new assembly, fasten it, reconnect the needed objects before attaching the trim covers.