How to repair a frozen door lock cylinder on 2003 Buick Rendezvous?

To thaw a frozen door lock cylinder, use the Heat Gun (J 25070) to apply heat at the cylinder region without damaging the painted areas. Use a paper clip or similar item to prop open the shutter door and blow air into the cylinder using compressed air and attachment blow gun. With the shutter door open, inject a small quantity of multi-purpose lubricant (GM P/N 12346241 or equivalent) into the cylinder. Finally, push the key into the cylinder a few times to fully spread the lubricant, and wipe the excess residue from the key.

OEM 2003 Buick Rendezvous Door Lock Cylinder

Door Lock Cylinder Tumbler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Door Lock Cylinder found

View related parts
2003 Buick Rendezvous Lock Cylinder
Part Number: 88954045
Product Specifications
- Other Name: Cylinder Kit, Front Side Door Lock (Uncoded); Door Lock Cylinder; Cylinder Kit, Door Outside Lock
- Position: Front
- Replaces: 89025802, 88894782
- Item Weight: 0.40 Pounds
- Item Dimensions: 3.6 x 2.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 88954045
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Buick Rendezvous Submodels:
- CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

2003 Buick Rendezvous Door Lock Cylinder

With a comprehensive array of OEM 2003 Buick Rendezvous Door Lock Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Buick Rendezvous Door Lock Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Buick Rendezvous Parts Questions & Experts Answers

Q: How to repair a frozen door lock cylinder on 2003 Buick Rendezvous?
A: To thaw a frozen door lock cylinder, use the Heat Gun (J 25070) to apply heat at the cylinder region without damaging the painted areas. Use a paper clip or similar item to prop open the shutter door and blow air into the cylinder using compressed air and attachment blow gun. With the shutter door open, inject a small quantity of multi-purpose lubricant (GM P/N 12346241 or equivalent) into the cylinder. Finally, push the key into the cylinder a few times to fully spread the lubricant, and wipe the excess residue from the key.