Other Name: Belt, Water Pump, A/C Compressor, Generator, Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt.; Fan Belt; Power Steering Belt; Belt, Drive
Replaces: 30021607
Item Weight: 0.60 Pounds
Item Dimensions: 15.5 x 3.8 x 0.9 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 30026873
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2003 Chevrolet Tracker Submodels:
Other Name: Belt, Water Pump; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, Drive
Item Weight: 0.50 Pounds
Item Dimensions: 12.6 x 11.9 x 0.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 30026799
Warranty: This genuine part is guaranteed by GM's
factory warranty.
More Info
Fits the following 2003 Chevrolet Tracker Submodels:
Base, LT, ZR2 | 6 Cyl 2.5 L GAS
2003 Chevrolet Tracker Drive Belt
With a comprehensive array of OEM 2003 Chevrolet Tracker Drive Belt, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Tracker Drive Belt are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2003 Chevrolet Tracker Parts Questions & Experts Answers
Q: How to replace the drive belt for the generator, A/C, and power steering on 2003 Chevrolet Tracker?
A: The first step to replace the generator a/c power steering Drive Belt requires disconnecting the negative Battery Cable. A wrench should be used to rotate the belt tensioner clockwise which releases Drive Belt tension before removing the accessory Drive Belt. Thoroughly check the belt for indications of cuts or cracks and wear as well as deformation or unusual characteristics before making a new belt purchase. The instrument for installing the accessory Drive Belt requires correct routing on drive pulleys followed by clockwise rotation of the belt tensioner with a wrench while adding proper belt tension during installation. After installing the belt check it has accurate placement on all pulleys before you release the belt tensioner. A correctly installed new belt should position its hash mark inside a defined range on the tensioner device while any indication mark to the left of the hash mark requires belt replacement. The procedure ends by connecting the negative Battery Cable before tightening the Battery Cable bolt to 15 nm (11 ft. Lbs.).