How to replace the Mass Air Flow Sensor on 2003 Chevrolet Tracker?

Begin the maf sensor replacement process by taking out the intake manifold air inlet duct and disconnecting the maf sensor connector. You should remove both maf sensor bracket attachment bolts to take out the maf sensor from the air filter housing. Reinstall by placing the maf sensor inside the air filter housing then fasten it with two bolts which need to be tightened to 10 n.m (89 lb in). Reconnect the maf sensor electrical connector followed by installation of the intake manifold air inlet duct.

OEM 2003 Chevrolet Tracker Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mass Air Flow Sensor found

View related parts
2003 Chevrolet Tracker Mass Air Flow Sensor
Part Number: 30020654
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Sensor Assembly; Air Mass Sensor
- Item Weight: 0.80 Pounds
- Item Dimensions: 9.1 x 8.5 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 30020654
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2003 Chevrolet Tracker Submodels:
- Base, LSi, LT, ZR2 | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS

2003 Chevrolet Tracker Mass Air Flow Sensor

With a comprehensive array of OEM 2003 Chevrolet Tracker Mass Air Flow Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 Chevrolet Tracker Mass Air Flow Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 Chevrolet Tracker Parts Questions & Experts Answers

Q: How to replace the Mass Air Flow Sensor on 2003 Chevrolet Tracker?
A: Begin the maf sensor replacement process by taking out the intake manifold air inlet duct and disconnecting the maf sensor connector. You should remove both maf sensor bracket attachment bolts to take out the maf sensor from the air filter housing. Reinstall by placing the maf sensor inside the air filter housing then fasten it with two bolts which need to be tightened to 10 n.m (89 lb in). Reconnect the maf sensor electrical connector followed by installation of the intake manifold air inlet duct.

Related 2003 Chevrolet Tracker Parts

Alternate Year Models

2002 Chevrolet Tracker Mass Air Flow Sensor