OEM 2003 GMC Safari Steering Knuckle

Front Steering Knuckle
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

  • 2003 GMC Safari Steering Knuckle - 15124101
    2003 GMC Safari Steering Knuckle Diagram - 15124101
    View related parts

    2003 GMC Safari Knuckle, Driver Side

    Part Number: 15124101
    $243.71 MSRP: $383.45
    You Save: $139.74 (37%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Knuckle, Steering
    • Position: Driver Side
    • Item Weight: 18.20 Pounds
    • Item Dimensions: 14.6 x 13.5 x 6.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 15124101
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2003 GMC Safari Submodels:
    • Base, SLE, SLT | 6 Cyl 4.3 L GAS
  • 2003 GMC Safari Steering Knuckle - 18060693
    2003 GMC Safari Steering Knuckle Diagram - 18060693
    View related parts
    Product Specifications
    • Other Name: Knuckle, Steering
    • Position: Driver Side
    • Item Weight: 23.80 Pounds
    • Item Dimensions: 14.4 x 13.8 x 7.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 18060693
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2003 GMC Safari Submodels:
    • Base, SLE, SLT | 6 Cyl 4.3 L GAS
  • 2003 GMC Safari Steering Knuckle - 18060694
    2003 GMC Safari Steering Knuckle Diagram - 18060694
    View related parts
    Product Specifications
    • Other Name: Knuckle, Steering
    • Position: Passenger Side
    • Item Weight: 24.00 Pounds
    • Item Dimensions: 14.3 x 13.2 x 7.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 18060694
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2003 GMC Safari Submodels:
    • Base, SLE, SLT | 6 Cyl 4.3 L GAS
  • 2003 GMC Safari Steering Knuckle - 15124102
    2003 GMC Safari Steering Knuckle Diagram - 15124102
    View related parts
    Product Specifications
    • Other Name: Knuckle, Steering
    • Position: Passenger Side
    • Item Weight: 20.00 Pounds
    • Item Dimensions: 14.3 x 13.5 x 7.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 15124102
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2003 GMC Safari Submodels:
    • Base, SLE, SLT | 6 Cyl 4.3 L GAS

2003 GMC Safari Steering Knuckle

With a comprehensive array of OEM 2003 GMC Safari Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2003 GMC Safari Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2003 GMC Safari Steering Knuckle Parts Questions & Experts Answers

  • Q: How to replace the steering knuckle on 2003 GMC Safari?
    A: In order to change the Steering Knuckle, start first with an elevating and holding the vehicle, keeping the floor jack under the lower Control Arm to secure its position and avoid personal danger. Take away the tire and wheel, take out the Torsion Bar, as well as the Wheel Hub and bearing. After that, take off the outer tie rod cotter pin and the retaining nut, remove the outer tie rod from the Steering Knuckle, using the steering linkage and tie rod puller (J 24319-B). Have a go to remove upper Ball Joint cotter pin and retaining nut, as well as attach the Ball Joint separator (J 36607) to separate the upper Ball Joint from the Steering Knuckle. Do so again for the lower Ball Joint by first taking off its cotter pin and retaining nut, and using a pry bar to help release the lower Ball Joint stud from the Steering Knuckle. Once having removed the Steering Knuckle from the support and slipped out its seal, install the new seal with the help of the Steering Knuckle seal installer (J 36605). Reinstall the Steering Knuckle to the upper and lower Ball Joint, securing the lower Ball Joint and its retaining nut to 128 nm (95 ft. Lbs.) and the upper Ball Joint to 98 nm (72 ft. Lbs.). Appropriate cotter pins should be installed, nuts should be well tightened to allow for the insertion of the pins, and the ends beaten flat against the nuts. Install the outer tie rod ball stud to the Steering Knuckle and use the retaining nut by tightening up with 49 nm (36 ft. Lbs.), followed by fitting a new cotter pin. Lastly, reinstall the hub and the bearing assembly, load the Torsion Bar, put the tire and wheel in place, lower the vehicle, and inspect the front wheel alignment.

Related 2003 GMC Safari Parts