How to replace the coolant reservoir on 2004 Buick LeSabre?

Before replacing the coolant recovery reservoir, drain the coolant first;using the hose clamp pliers (J 38185),disconnect the coolant hose from the recovery reservoir. Then scrap the coolant recovery reservoir nuts and bolt, then take off the recovery reservoir from the vehicle. For installation, replace the Coolant Reservoir to its place and install the mounting nuts and bolts by tightening the fasteners to 6 nm (53 inch lbs.). Finally, attach the coolant hose to the reservoir using the hose clamp pliers (J 38185) and fill up the cooling system.

OEM 2004 Buick LeSabre Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Coolant Reservoir found

View related parts
2004 Buick LeSabre Recovery Tank
Part Number: 25725820
Product Specifications
- Other Name: Reservoir, Engine Coolant Recovery; Coolant Reservoir
- Replaces: 25703057, 25654622
- Item Weight: 1.60 Pounds
- Item Dimensions: 13.1 x 8.8 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25725820
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Buick LeSabre Submodels:
- Custom, Limited | 6 Cyl 3.8 L GAS

2004 Buick LeSabre Coolant Reservoir

With a comprehensive array of OEM 2004 Buick LeSabre Coolant Reservoir, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Buick LeSabre Coolant Reservoir are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Buick LeSabre Coolant Reservoir Parts Questions & Experts Answers

Q: How to replace the coolant reservoir on 2004 Buick LeSabre?
A: Before replacing the coolant recovery reservoir, drain the coolant first;using the hose clamp pliers (J 38185),disconnect the coolant hose from the recovery reservoir. Then scrap the coolant recovery reservoir nuts and bolt, then take off the recovery reservoir from the vehicle. For installation, replace the Coolant Reservoir to its place and install the mounting nuts and bolts by tightening the fasteners to 6 nm (53 inch lbs.). Finally, attach the coolant hose to the reservoir using the hose clamp pliers (J 38185) and fill up the cooling system.