How to replace the front center console on 2004 Chevrolet Aveo?

Disconnection of the vehicle's negative Battery Cable must occur before starting front floor console replacement. Start by removing the gearshift lever boot followed by all screws attaching the floor console. Disconnect the electrical connector and take out the floor console. Use 4 n.m (35 lb in) torque to install the screws when installing the floor console. Connect the electrical connector first then attach the console with these screws. Finish the installation by placing back the gearshift lever boot before reconnecting the negative Battery Cable.

OEM 2004 Chevrolet Aveo Center Console

Floor Console Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Center Console found

View related parts
2004 Chevrolet Aveo Console Body
Part Number: 96485052
Product Specifications
- Other Name: Console, Floor Console; Center Console Base
- Position: Front
- Item Weight: 2.30 Pounds
- Item Dimensions: 41.9 x 7.3 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96485052
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2004 Chevrolet Aveo Center Console

With a comprehensive array of OEM 2004 Chevrolet Aveo Center Console, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Aveo Center Console are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Aveo Center Console Parts Questions & Experts Answers

Q: How to replace the front center console on 2004 Chevrolet Aveo?
A: Disconnection of the vehicle's negative Battery Cable must occur before starting front floor console replacement. Start by removing the gearshift lever boot followed by all screws attaching the floor console. Disconnect the electrical connector and take out the floor console. Use 4 n.m (35 lb in) torque to install the screws when installing the floor console. Connect the electrical connector first then attach the console with these screws. Finish the installation by placing back the gearshift lever boot before reconnecting the negative Battery Cable.