How to replace the front center console on 2005 Chevrolet Aveo?

Begin floor console replacement by disconnecting battery negative cable then removing the gearshift lever boot. Start by removing floor console screws before you disconnect its electrical connection to pull out the floor console. Connect the electrical connector and install the floor console through the screws then tighten them to 4 n.m (35 lb in). You must put back the gearshift lever boot then reconnect the negative Battery Cable.

OEM 2005 Chevrolet Aveo Center Console

Floor Console Assembly

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Center Console found

View related parts
2005 Chevrolet Aveo Console Body
Part Number: 96485052
Product Specifications
- Other Name: Console, Floor Console; Center Console Base
- Position: Front
- Item Weight: 2.30 Pounds
- Item Dimensions: 41.9 x 7.3 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96485052
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2005 Chevrolet Aveo Center Console

With a comprehensive array of OEM 2005 Chevrolet Aveo Center Console, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Chevrolet Aveo Center Console are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Chevrolet Aveo Center Console Parts Questions & Experts Answers

Q: How to replace the front center console on 2005 Chevrolet Aveo?
A: Begin floor console replacement by disconnecting battery negative cable then removing the gearshift lever boot. Start by removing floor console screws before you disconnect its electrical connection to pull out the floor console. Connect the electrical connector and install the floor console through the screws then tighten them to 4 n.m (35 lb in). You must put back the gearshift lever boot then reconnect the negative Battery Cable.