OEM 2004 Chevrolet Corvette Power Steering Pump

2004 Chevrolet Corvette Power Steering Pump Parts Questions & Experts Answers

• Q: How to replace the power steering pump on 2004 Chevrolet Corvette?

  A: Starting the Power Steering Pump replacement requires removal of the brake pressure modulator valve (BPMV) with its bracket as well as the power steering fluid reservoir and Power Steering Pump pulley. The technician should separate both the Power Steering Reservoir outlet pipe/hose from the pump while also separating the power steering pressure hose. Disassemble the Power Steering Pump by starting with the removal of Power Steering Pump mounting bolts then eliminate both the Power Steering Pump front bracket and Power Steering Pump from the rear bracket . The first step for replacement is to fix the Power Steering Pump and Power Steering Pump front bracket onto the Power Steering Pump rear bracket while adhering to the instructions in the fastener notice available in service precautions. You must fasten the Power Steering Pump using mounting bolts which must achieve torque of 25 nm (18 ft. Lbs.). The power steering installation procedure involves reinstating the Power Steering Reservoir outlet pipe/hose first then the power steering pressure hose followed by Power Steering Pump pulley and power steering fluid reservoir. Finish by replacing the bpmv bracket before putting back the bpmv and performing power steering system bleeding.