How to replace the front (tilt) Seat Motor on 2004 Chevrolet Malibu?

The replacement process for the Front (Tilt) Seat Adjuster Motor requires placing the seat in the full up position until the motor tension dissipates before removing this front seat. Before removing the seat motor it is necessary to disconnect electrical connectors and remove the fastener holding the seat motor and pull out the roll pin. Start by installing the seat motor and proceeding to install the seat motor roll pin as the next step. Follow this step by installing the seat motor fastener and tightening it to 7 N.m (62 lb in), then restore the electrical connectors before installing the front seat.

OEM 2004 Chevrolet Malibu Seat Motor

Car Seat Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Seat Motor found

View related parts
2004 Chevrolet Malibu Adjust Motor, Front Driver Side
Part Number: 22718107
Product Specifications
- Other Name: Actuator, Front Seat Adjuster; Motor; Actuator
- Position: Front Driver Side
- Item Weight: 4.10 Pounds
- Item Dimensions: 21.1 x 6.0 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 22718107
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2004 Chevrolet Malibu Submodels:
- Base, Classic LS, Classic LT, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS

2004 Chevrolet Malibu Seat Motor

With a comprehensive array of OEM 2004 Chevrolet Malibu Seat Motor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2004 Chevrolet Malibu Seat Motor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2004 Chevrolet Malibu Seat Motor Parts Questions & Experts Answers

Q: How to replace the front (tilt) Seat Motor on 2004 Chevrolet Malibu?
A: The replacement process for the Front (Tilt) Seat Adjuster Motor requires placing the seat in the full up position until the motor tension dissipates before removing this front seat. Before removing the seat motor it is necessary to disconnect electrical connectors and remove the fastener holding the seat motor and pull out the roll pin. Start by installing the seat motor and proceeding to install the seat motor roll pin as the next step. Follow this step by installing the seat motor fastener and tightening it to 7 N.m (62 lb in), then restore the electrical connectors before installing the front seat.