OEM 2005 Buick LaCrosse Tie Rod End

2005 Buick LaCrosse Parts Questions & Experts Answers

• Q: How to replace the Rack and Pinion Outer Tie Rod End on 2005 Buick LaCrosse?

  A: Before replacing the Rack And Pinion outer Tie Rod End start by lifting and supporting the vehicle. Begin the repair by removing the wheel assembly followed by severing the prevailing torque nut on the tie rod assembly while you loosen the inner tie rod assembly's jam nut. Safeguard the steering linkage joint by inserting a wedge tool between it and its attached component to stop seal damage and stop premature failure. The universal steering linkage puller (J24319-B) assists with removing the outer tie rod assembly from the Steering Knuckle before separating it from the inner tie rod assembly . First fit the outer tie rod assembly to the inner tie rod assembly but leave the jam nut relaxed until you finish securing connections between all components. Then join the outer tie rod assembly to the Steering Knuckle. The installer must tighten the prevailing torque nut installed on the outer tie rod assembly at a torque value of 46 nm (34 ft. Lbs.). Reattach the tire and wheel assembly afterwards and perform a front end alignment before lowering the vehicle back to the ground.