How to replace the Light Control Module on 2005 Buick Park Avenue?

You should start by taking off the lower IP trim panel, remove the two fasteners that hold the heater A/C duct, and move the duct away to reach the panel dimming control module bracket. After that, loosen the three fasteners on the lamp control module bracket and take off the two electrical connectors from the module. Installation steps include connecting the two electrical connectors to the lamp control module, attaching the lamp control module bracket to the instrument panel, adjusting the heater A/C duct back into place, putting the two fasteners in, and replacing the lower IP trim panel.

OEM 2005 Buick Park Avenue Light Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Light Control Module found

View related parts
2005 Buick Park Avenue Sentinel Module
Part Number: 25628664
Product Specifications
- Other Name: Module Assembly-Headlamp Auto Control; Module; Module, Headlamp/Fog Lamp/Turn Signal
- Item Weight: 0.90 Pounds
- Item Dimensions: 9.0 x 4.9 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25628664
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Park Avenue Submodels:
- Base, Ultra | 6 Cyl 3.8 L GAS

2005 Buick Park Avenue Light Control Module

With a comprehensive array of OEM 2005 Buick Park Avenue Light Control Module, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Park Avenue Light Control Module are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Park Avenue Parts Questions & Experts Answers

Q: How to replace the Light Control Module on 2005 Buick Park Avenue?
A: You should start by taking off the lower IP trim panel, remove the two fasteners that hold the heater A/C duct, and move the duct away to reach the panel dimming control module bracket. After that, loosen the three fasteners on the lamp control module bracket and take off the two electrical connectors from the module. Installation steps include connecting the two electrical connectors to the lamp control module, attaching the lamp control module bracket to the instrument panel, adjusting the heater A/C duct back into place, putting the two fasteners in, and replacing the lower IP trim panel.