How to replace the Multifunction Turn Signal Switch Housing on 2005 Buick Rainier?

To remove the multifunction Turn Signal Switch housing, one should first test the restraint systems to deactivate them by adhering to the proper method. Next, the Steering Wheel from the column needs to be removed as well as ignitions lock cylinder case assembly. After that, remove the turn signal and multifunction switch from the chassis and slide the turn sign switch house down of the steering column shaft assembly. For installation, tighten the Turn Signal Switch housing against the steering column tilt head so the screws from the turn signal and multifunction switch assembly align. Shift the Turn Signal Switch housing over the column shaft assembly, then install turn signal and multifunction switch assembly, then the ignition lock cylinder case and the Steering Wheel over the column. Finally, enable the restraint systems.

OEM 2005 Buick Rainier Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Turn Signal Switches found

View related parts
2005 Buick Rainier Turn Signal Switch Part Number: 12450067
$148.01 MSRP: $304.16
You Save: $156.15 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp Dimmer; Multi-Function Switch; Multi Purpose Switch; Multifunction Switch; Combination Switch; Switch, Windshield Wiper & Washer Control; Switch, Turn Signal Lamp
- Item Weight: 2.80 Pounds
- Item Dimensions: 11.6 x 5.0 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12450067
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS
View related parts
2005 Buick Rainier Turn Signal Switch Part Number: 12450066
$131.50 MSRP: $246.94
You Save: $115.44 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Switch; Combination Switch; Switch, Windshield Wiper & Washer Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Item Weight: 4.20 Pounds
- Item Dimensions: 10.8 x 5.7 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12450066
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2005 Buick Rainier Submodels:
- CXL, CXL Plus | 6 Cyl 4.2 L GAS, 8 Cyl 5.3 L GAS

2005 Buick Rainier Turn Signal Switch

With a comprehensive array of OEM 2005 Buick Rainier Turn Signal Switch, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Rainier Turn Signal Switch are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Rainier Turn Signal Switch Parts and Q&A

Q: How to replace the Multifunction Turn Signal Switch Housing on 2005 Buick Rainier?
A: To remove the multifunction Turn Signal Switch housing, one should first test the restraint systems to deactivate them by adhering to the proper method. Next, the Steering Wheel from the column needs to be removed as well as ignitions lock cylinder case assembly. After that, remove the turn signal and multifunction switch from the chassis and slide the turn sign switch house down of the steering column shaft assembly. For installation, tighten the Turn Signal Switch housing against the steering column tilt head so the screws from the turn signal and multifunction switch assembly align. Shift the Turn Signal Switch housing over the column shaft assembly, then install turn signal and multifunction switch assembly, then the ignition lock cylinder case and the Steering Wheel over the column. Finally, enable the restraint systems.