How to replace the MAP Sensor on 2005 Buick Terraza?

In order to replace the manifold absolute pressure (MAP) sensor, the first process to undergo is the removing of the disconnecting the MAP Sensor electrical connector. Next, loose the MAP Sensor retaining bolt and bracket the loose the MAP Sensor and the MAP Sensor port seal if it goes to the go to Intake Manifold. For installation, align the MAP Sensor and the MAP Sensor retaining bracket and bolt . Make sure to tighten the bolt to 10 n.m (89 lb in) according to the fastener notice in service precautions and lastly reconnect the MAP Sensor electrical connector.

OEM 2005 Buick Terraza MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2005 Buick Terraza M.A.P. Sensor
Part Number: 19418807
$76.01 MSRP: $147.51
You Save: $71.50 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Computer Control Sensors; Manifold Absolute Pressure Sensor; MAP Sensor
- Replaces: 12614970, 16212460
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19418807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2005 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2005 Buick Terraza MAP Sensor

With a comprehensive array of OEM 2005 Buick Terraza MAP Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2005 Buick Terraza MAP Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2005 Buick Terraza Parts Questions & Experts Answers

Q: How to replace the MAP Sensor on 2005 Buick Terraza?
A: In order to replace the manifold absolute pressure (MAP) sensor, the first process to undergo is the removing of the disconnecting the MAP Sensor electrical connector. Next, loose the MAP Sensor retaining bolt and bracket the loose the MAP Sensor and the MAP Sensor port seal if it goes to the go to Intake Manifold. For installation, align the MAP Sensor and the MAP Sensor retaining bracket and bolt . Make sure to tighten the bolt to 10 n.m (89 lb in) according to the fastener notice in service precautions and lastly reconnect the MAP Sensor electrical connector.